On Mon, Oct 8, 2018 at 11:12 PM Vladimir Zapolskiy [off-list ref] wrote:

From: Sandeep Jain <redacted>

(...)

+- ti,pixel-clock-edge : Selects Pixel Clock Edge.
+       Possible values are "<1>" or "<0>".
+       If "ti,pixel-clock-edge" is High <1>, output data is strobed on the
+       Rising edge of the PCLK. If ti,pixel-clock-edge is Low <0>, data is
+       strobed on the Falling edge of the PCLK.
+       If "ti,pixel-clock-edge" is not mentioned, the pixel clock edge
+       value is not touched and given by hardware pin strapping.

Please use the existing binding in
Documentation/devicetree/bindings/display/panel/display-timing.txt
for this: pixelclk-active = [<0>|<1>];

Please reference the above document in your binding.

Yours,
Linus Walleij
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel