[PATCH v5 11/12] ARM64: add dma remap for BrcmSTB PCIe
From: Jim Quinlan <jim2101024@gmail.com>
Date: 2018-09-06 20:43:00
Also in:
linux-mips
Subsystem:
broadcom bcm2711/bcm2835 arm architecture, broadcom bcm7xxx arm architecture, broadcom stb pcie driver, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Florian Fainelli, Jim Quinlan, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
The BrcmSTB PCIe controller needs to remap DMA accesses to it because of the requirements of its interface with the SOC memory controllers. Signed-off-by: Jim Quinlan <jim2101024@gmail.com> --- drivers/pci/controller/Kconfig | 1 + drivers/pci/controller/pcie-brcmstb.c | 12 ++++++++++++ 2 files changed, 13 insertions(+)
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 8daa621..4394430 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig@@ -284,6 +284,7 @@ config PCIE_BRCMSTB depends on OF && PCI_MSI depends on SOC_BRCMSTB default ARCH_BRCMSTB || BMIPS_GENERIC + select ARCH_HAS_PHYS_TO_DMA if ARM64 help Say Y here to enable PCIe host controller support for Broadcom Settop Box SOCs. A Broadcom SOC will may have
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index a805d87..ae9df8e 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c@@ -974,6 +974,18 @@ phys_addr_t brcm_dma_to_phys(struct device *dev, dma_addr_t dev_addr) return (phys_addr_t)dev_addr; } +#if defined(CONFIG_ARM64) +dma_addr_t __phys_to_dma(struct device *dev, phys_addr_t paddr) +{ + return brcm_phys_to_dma(dev, paddr); +} + +phys_addr_t __dma_to_phys(struct device *dev, dma_addr_t dev_addr) +{ + return brcm_dma_to_phys(dev, dev_addr); +} +#endif + static int brcm_pcie_add_controller(struct brcm_pcie *pcie) { int i, ret = 0;
--
1.9.0.138.g2de3478