Re: [PATCH 0/4] Update am437x and am335x dts to probe with ti-sysc
From: Tony Lindgren <tony@atomide.com>
Date: 2018-09-27 21:43:28
Also in:
linux-arm-kernel, linux-omap
From: Tony Lindgren <tony@atomide.com>
Date: 2018-09-27 21:43:28
Also in:
linux-arm-kernel, linux-omap
* Tony Lindgren [off-list ref] [180927 14:58]:
* Keerthy [off-list ref] [180927 05:00]:quoted
On Thursday 27 September 2018 05:01 AM, Tony Lindgren wrote:quoted
The following works for me, does it look OK to you?This works pretty well with DS0 on am437x-gp-evm. Tested rtc wakeup, wakeup using uart and touch. All of the work well. https://pastebin.ubuntu.com/p/RJhJJKhJHX/OK good to hear and thanks for testing again.quoted
Also tested on beaglebone black DS0 works fine. Although there seems to be an additional warning which was not seen before: "l4-wkup-clkctrl:0008:0: failed to disable" log: https://pastebin.ubuntu.com/p/Ns2WRdVkXS/ Also the above warning is present without/with this patch on [0]. No such warnings on am4 though.OK. For am335x I'll post an updated version of the am335x changes to fix the gpio dbck offset.
FYI I have pushed updated patches into a new temporary test branch omap-for-v4.20/dt-ti-sysc-tmp-testing-v2 with initial dra7 dts changes too. Regards, Tony