Thread (1 message) 1 message, 1 author, 2018-09-26

Re: [PATCH v2 0/5] Meson8b: add support for the Endless Mini EC-100

From: Kevin Hilman <khilman@baylibre.com>
Date: 2018-09-26 08:50:55
Also in: linux-amlogic, linux-arm-kernel

Martin Blumenstingl [off-list ref] writes:
This series adds support for the "Endless Mini" grapefruit-sized mini PC
from Endless Mobile, Inc. The internal name of this device is EC-100
(this can be found for example in the GPL kernel tree which is based on
Amlogic's 3.10 kernel: [0]).

The board is using a Meson8b (S805) SoC with various peripherals.
The biggest difference compared to boards which are based on Amlogic's
reference designs is that this board comes with an embedded micro-
controller called "EC" which makes the system LED pulse during boot
and allows powering off the board. It also comes with a 10/100 Mbit/s
Ethernet port and one USB host port.
There are two variants:
- 2GB RAM, 32GB storage, 802.11bgn and Bluetooth 4.0
- 1GB RAM, 24GB storage, neither wifi nor Bluetooth

This series contains support for the new board as well as supporting
patches for the new vendor prefix and the pin definitions in
meson8b.dtsi so various peripherals can be enabled.
Applied to v4.20/dt,

Thanks,

Kevin
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help