[PATCH v2 1/2] dt-bindings: hwmon: Add ina3221 documentation
From: Nicolin Chen <nicoleotsuka@gmail.com>
Date: 2018-09-21 20:13:15
Also in:
linux-doc, linux-hwmon, lkml
Subsystem:
hardware monitoring, open firmware and flattened device tree bindings, the rest · Maintainers:
Guenter Roeck, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
Texas Instruments INA3221 is a triple-channel shunt and bus voltage monitor. This patch adds a DT binding doc for it. Signed-off-by: Nicolin Chen <nicoleotsuka@gmail.com> --- Changelog v1->v2: * Dropped channel name properties * Added child node definitions. * * Added shunt resistor property in the child node * * Added status property to indicate connection status * * Changed to use child node name as the label of input source .../devicetree/bindings/hwmon/ina3221.txt | 38 +++++++++++++++++++ 1 file changed, 38 insertions(+) create mode 100644 Documentation/devicetree/bindings/hwmon/ina3221.txt
diff --git a/Documentation/devicetree/bindings/hwmon/ina3221.txt b/Documentation/devicetree/bindings/hwmon/ina3221.txt
new file mode 100644
index 000000000000..02a2ffbb7c3f
--- /dev/null
+++ b/Documentation/devicetree/bindings/hwmon/ina3221.txt@@ -0,0 +1,38 @@ +ina3221 properties + +1) ina3221 node + Required properties: + - compatible: Must be "ti,ina3221" + - reg: I2C address + + = The node contains optional child nodes for three channels = + = Each child node describes the information of input source = + + Example: + + ina3221@40 { + compatible = "ti,ina3221"; + reg = <0x40>; + [ child node definitions... ] + }; + +2) child nodes + The names of child nodes should indicate input source names + + Required properties: + - input-id: Must be 1, 2 or 3 + + Optional properties: + - shunt-resistor: Shunt resistor value in micro-Ohm + - status: Should be "disabled" if no input source + + Example: + + input1 { + input-id = <0x1>; + status = "disabled"; + }; + VDD_GPU { + input-id = <0x2>; + shunt-resistor = <5>; + };
--
2.17.1