[PATCH 8/9] gpio: tegra186: Rename flow variable to type
From: Thierry Reding <hidden>
Date: 2018-09-21 10:26:06
Also in:
linux-gpio, linux-tegra, lkml
Subsystem:
gpio subsystem, the rest · Maintainers:
Linus Walleij, Bartosz Golaszewski, Linus Torvalds
From: Thierry Reding <redacted> The IRQ core code refers to the interrupt type by that name, whereas the term flow is almost never used. Some GPIO controllers use the term flow_type, but it is most consistent to just go with the IRQ core terminology. Signed-off-by: Thierry Reding <redacted> --- drivers/gpio/gpio-tegra186.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/gpio/gpio-tegra186.c b/drivers/gpio/gpio-tegra186.c
index 9d0292c8a199..66ec38bb7954 100644
--- a/drivers/gpio/gpio-tegra186.c
+++ b/drivers/gpio/gpio-tegra186.c@@ -279,7 +279,7 @@ static void tegra186_irq_unmask(struct irq_data *data) writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG); } -static int tegra186_irq_set_type(struct irq_data *data, unsigned int flow) +static int tegra186_irq_set_type(struct irq_data *data, unsigned int type) { struct tegra_gpio *gpio = irq_data_get_irq_chip_data(data); void __iomem *base;
@@ -293,7 +293,7 @@ static int tegra186_irq_set_type(struct irq_data *data, unsigned int flow) value &= ~TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_TYPE_MASK; value &= ~TEGRA186_GPIO_ENABLE_CONFIG_TRIGGER_LEVEL; - switch (flow & IRQ_TYPE_SENSE_MASK) { + switch (type & IRQ_TYPE_SENSE_MASK) { case IRQ_TYPE_NONE: break;
@@ -325,7 +325,7 @@ static int tegra186_irq_set_type(struct irq_data *data, unsigned int flow) writel(value, base + TEGRA186_GPIO_ENABLE_CONFIG); - if ((flow & IRQ_TYPE_EDGE_BOTH) == 0) + if ((type & IRQ_TYPE_EDGE_BOTH) == 0) irq_set_handler_locked(data, handle_level_irq); else irq_set_handler_locked(data, handle_edge_irq);
--
2.19.0