[PATCH v4 1/2] dt-bindings: PCI: dra7xx: Add bindings for unaligned access in host mode
From: Vignesh R <vigneshr@ti.com>
Date: 2018-09-17 18:06:07
Also in:
linux-omap, linux-pci, lkml
Subsystem:
open firmware and flattened device tree bindings, pci driver for ti dra7xx/j721e, pci native host bridge and endpoint drivers, pci subsystem, the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Vignesh Raghavendra, Lorenzo Pieralisi, Krzysztof Wilczyński, Manivannan Sadhasivam, Bjorn Helgaas, Linus Torvalds
Update device tree binding documentation of TI's dra7xx PCI controller for enabling unaligned mem access as applicable not just in EP mode but in host mode as well. Signed-off-by: Vignesh R <vigneshr@ti.com> Reviewed-by: Rob Herring <robh@kernel.org> --- Documentation/devicetree/bindings/pci/ti-pci.txt | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/pci/ti-pci.txt b/Documentation/devicetree/bindings/pci/ti-pci.txt
index 7f7af3044016..452fe48c4fdd 100644
--- a/Documentation/devicetree/bindings/pci/ti-pci.txt
+++ b/Documentation/devicetree/bindings/pci/ti-pci.txt@@ -26,6 +26,11 @@ HOST MODE ranges, interrupt-map-mask, interrupt-map : as specified in ../designware-pcie.txt + - ti,syscon-unaligned-access: phandle to the syscon DT node. The 1st argument + should contain the register offset within syscon + and the 2nd argument should contain the bit field + for setting the bit to enable unaligned + access. DEVICE MODE ===========
--
2.19.0