[PATCH net-next v3 01/11] MIPS: mscc: ocelot: make HSIO registers address range a syscon
From: Quentin Schulz <hidden>
Date: 2018-09-14 08:18:35
Also in:
linux-mips, lkml, netdev
Subsystem:
microsemi mips socs, mips, the rest · Maintainers:
Alexandre Belloni, Thomas Bogendoerfer, Linus Torvalds
HSIO contains registers for PLL5 configuration, SerDes/switch port muxing and a thermal sensor, hence we can't keep it in the switch DT node. Acked-by: Paul Burton <redacted> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Quentin Schulz <redacted> --- arch/mips/boot/dts/mscc/ocelot.dtsi | 14 +++++++++----- 1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
index f7eb612..149b1a7 100644
--- a/arch/mips/boot/dts/mscc/ocelot.dtsi
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi@@ -107,7 +107,6 @@ reg = <0x1010000 0x10000>, <0x1030000 0x10000>, <0x1080000 0x100>, - <0x10d0000 0x10000>, <0x11e0000 0x100>, <0x11f0000 0x100>, <0x1200000 0x100>,
@@ -121,10 +120,10 @@ <0x1280000 0x100>, <0x1800000 0x80000>, <0x1880000 0x10000>; - reg-names = "sys", "rew", "qs", "hsio", "port0", - "port1", "port2", "port3", "port4", "port5", - "port6", "port7", "port8", "port9", "port10", - "qsys", "ana"; + reg-names = "sys", "rew", "qs", "port0", "port1", + "port2", "port3", "port4", "port5", "port6", + "port7", "port8", "port9", "port10", "qsys", + "ana"; interrupts = <21 22>; interrupt-names = "xtr", "inj";
@@ -231,5 +230,10 @@ pinctrl-0 = <&miim1>; status = "disabled"; }; + + hsio: syscon@10d0000 { + compatible = "mscc,ocelot-hsio", "syscon", "simple-mfd"; + reg = <0x10d0000 0x10000>; + }; }; };
--
git-series 0.9.1