On 08/09/18 05:54, Srinath Mannam wrote:

These patches adds the stingray thermal driver and its
corresponding DT nodes with documentation.

Changes from v2:
  - All stingray TMON DT nodes are combine together into single.
    Temperature registers are combined into one mem resource.
    brcm,tmon-mask parameter has available TMONs mask value.
  - All available TMONs are initialized together in single
    instance of driver probe call.

Changes from v1:
  - Fixed auto build sparce warning.

Thermal maintainers, can you please review patch #3? The binding and DTS
changes can go through arm-soc if you would like, or you can take
patches 1 and 3 and I take patch 2, either way is fine.

Thank you

Pramod Kumar (3):
  dt-bindings: thermal: Add binding document for SR thermal
  arm64: dts: stingray: Add Stingray Thermal DT support.
  thermal: broadcom: Add Stingray thermal driver

 .../bindings/thermal/brcm,sr-thermal.txt           |  23 +++
 .../arm64/boot/dts/broadcom/stingray/stingray.dtsi |  13 ++
 drivers/thermal/Kconfig                            |   3 +-
 drivers/thermal/broadcom/Kconfig                   |   9 +
 drivers/thermal/broadcom/Makefile                  |   1 +
 drivers/thermal/broadcom/sr-thermal.c              | 216 +++++++++++++++++++++
 6 files changed, 264 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/thermal/brcm,sr-thermal.txt
 create mode 100644 drivers/thermal/broadcom/sr-thermal.c

-- 
Florian