[PATCH V2 0/3] ARM: dts: add Raspberry Pi Compute Module 3 and IO board · Stefan Wahren <hidden> · 2018-08-27
[PATCH V2 1/3] dt-bindings: bcm: Add Raspberry Pi CM3 and CM3L · Stefan Wahren <hidden> · 2018-08-27
[PATCH V2 2/3] ARM: dts: add Raspberry Pi Compute Module 3 and IO board · Stefan Wahren <hidden> · 2018-08-27
[PATCH V2 3/3] arm64: dts: broadcom: Add reference to Compute Module IO Board V3 · Stefan Wahren <hidden> · 2018-08-27
Re: [PATCH V2 3/3] arm64: dts: broadcom: Add reference to Compute Module IO Board V3 · Liviu Dudau <hidden> · 2018-09-23
Re: [PATCH V2 3/3] arm64: dts: broadcom: Add reference to Compute Module IO Board V3 · Stefan Wahren <hidden> · 2018-09-24
[PATCH] arm64: dts: broadcom: Use the .dtb name in the rule, rather than .dts · Liviu Dudau <hidden> · 2018-09-24
Re: [PATCH] arm64: dts: broadcom: Use the .dtb name in the rule, rather than .dts · Stefan Wahren <hidden> · 2018-09-24
Re: [PATCH] arm64: dts: broadcom: Use the .dtb name in the rule, rather than .dts · Florian Fainelli <f.fainelli@gmail.com> · 2018-09-25
Re: [PATCH] arm64: dts: broadcom: Use the .dtb name in the rule, rather than .dts · Olof Johansson <hidden> · 2018-09-25
Re: [PATCH] arm64: dts: broadcom: Use the .dtb name in the rule, rather than .dts · Stefan Wahren <hidden> · 2018-09-25
Re: [PATCH] arm64: dts: broadcom: Use the .dtb name in the rule, rather than .dts · Olof Johansson <hidden> · 2018-09-25
Re: [PATCH V2 0/3] ARM: dts: add Raspberry Pi Compute Module 3 and IO board · Stefan Wahren <hidden> · 2018-08-31

Re: [PATCH V2 0/3] ARM: dts: add Raspberry Pi Compute Module 3 and IO board

From: Stefan Wahren <hidden>
Date: 2018-08-31 09:35:49
Also in: linux-arm-kernel

Am 27.08.2018 um 20:05 schrieb Stefan Wahren:

This patch series add support for Rasberry Pi Compute Module 3 and
Compute Module 3 Lite.

Changes in V2:
- add Reviewed-by tag from Rob
- split arm and arm64 into separate patches

Stefan Wahren (3):
  dt-bindings: bcm: Add Raspberry Pi CM3 and CM3L
  ARM: dts: add Raspberry Pi Compute Module 3 and IO board
  arm64: dts: broadcom: Add reference to Compute Module IO Board V3

series applied to bcm2835-dt-next

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help