Hi OMAP3 DTS Maintainers,
is there any progress in merging this patch series?

We have some more patches in our queue which depend on them.

BR and thanks,
Nikolaus Schaller

Am 31.07.2018 um 09:11 schrieb H. Nikolaus Schaller [off-list ref]:

* Sebastian Reichel [off-list ref]
 asked why we have reg=<0> for port@1.
 Based on his comment we have removed the change for
 the opa362 reg property in the DT, but worked out a correct
 fix in the opa362 driver which solves the issue better.
 See: https://lore.kernel.org/patchwork/patch/968407/
* Ladislav Michl [off-list ref]
 has found a typo and we discussed NAND/OneNAND and
 how the partitions should be setup. A better solution
 would be to do it completely by u-boot, but unless we have
 that, we must fix it here.
* we omit the patch that replaces ti,non-removable by non-removable
 since additional internal tests have shown that it makes
 problems with finding the rootfs boot partition.
* instead we add a patch that explicitly sets broken-cd for mmc1.

PATCH V1 2018-07-25 09:00:42:
We have not upstreamed significant improvements collected
in the GTA04 vendor kernel tree for some years. The result
is that distribution kernels derived from upstream (e.g.
Debian) lag behind and miss significant features and fixes.


H. Nikolaus Schaller (32):
 ARM: dts: omap3-gta04: fix typo in backlight pins node name
 ARM: dts: omap3-gta04: fix some whitespace and tab style errors
 ARM: dts: omap3-gta04: give spi_lcd node a label so that we can
   overwrite in other DTS files
 ARM: dts: omap3-gta04: fixes for tvout / venc
 ARM: dts: omap3-gta04: add devconf1 setup for correct tvout pins
 ARM: dts: omap3-gta04: tvout: enable as display1 alias
 ARM: dts: omap3-gta04: fix touchscreen tsc2007
 ARM: dts: omap3-gta04: add pinmux for bmp085 EOC interrupt
 ARM: dts: omap3-gta04: make NAND partitions compatible with recent
   U-Boot
 ARM: dts: omap3-gta04: update gpmc NAND setup
 ARM: dts: omap3-gta04: keep vpll2 always on
 ARM: dts: omap3-gta04: add a comment how to reference the tca6507 gpio
 ARM: dts: omap3-gta04: add warning comment to vaux2 regulator
 ARM: dts: omap3-gta04: explicitly describe that mmc1 has no CD/WP
 ARM: dts: omap3-gta04: make use of input event include file and
   constants
 ARM: dts: omap3-gta04: map antenna detect GPIO to SW_LINEIN_INSERT key
   event
 ARM: dts: omap3-gta04: add camera interface parallel port
 ARM: dts: omap3-gta04: add camera pinmux
 ARM: dts: omap3-gta04: add mcbsp (audio subsystem) pinmux
 ARM: dts: omap3-gta04: add devconf0 setup for mcbsp1 clock pins
 ARM: dts: omap3-gta04: add mcbsp (audio subsystem) nodes
 ARM: dts: omap3-gta04a3: fix model name for A3 variant
 ARM: dts: omap3-gta04a4: fix model name for A4 variant
 ARM: dts: omap3-gta04a5: fix copyright of A5 variant
 ARM: dts: omap3-gta04a5: fix model name
 ARM: dts: omap3-gta04a5: fix whitepsace and tab style
 ARM: dts: omap3-gta04a5: add support for PPS
 ARM: dts: omap3-gta04a5: disable IrDA receiver to save power
 ARM: dts: omap3-gta04a5: add support for ti,wl1837 module
 ARM: dts: omap3-gta04a5: uses different sensors than gta04a4
 ARM: dts: omap3-gta04a5: define pinmux for bluetooth enable of
   ti,wl1837 module
 ARM: dts: omap3-gta04a5one: define GTA04A5 variant with OneNAND

arch/arm/boot/dts/omap3-gta04.dtsi     | 248 +++++++++++++++++++++++++++++----
arch/arm/boot/dts/omap3-gta04a3.dts    |   2 +-
arch/arm/boot/dts/omap3-gta04a4.dts    |   2 +-
arch/arm/boot/dts/omap3-gta04a5.dts    | 129 ++++++++++++++++-
arch/arm/boot/dts/omap3-gta04a5one.dts | 114 +++++++++++++++
5 files changed, 462 insertions(+), 33 deletions(-)
create mode 100644 arch/arm/boot/dts/omap3-gta04a5one.dts

-- 
2.12.2