[PATCH 2/6] usb: xhci-mtk: use maximum ESIT payload of endpiont context
From: Chunfeng Yun <chunfeng.yun@mediatek.com>
Date: 2018-08-29 02:55:36
Also in:
linux-arm-kernel, linux-mediatek, linux-usb, lkml
Subsystem:
mediatek usb3 drd ip driver, the rest, usb subsystem, usb xhci driver · Maintainers:
Chunfeng Yun, Linus Torvalds, Greg Kroah-Hartman, Mathias Nyman
Make use of maximum ESIT payload of endpoint context to calculate the number of packets to send in each ESIT Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com> --- drivers/usb/host/xhci-mtk-sch.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/usb/host/xhci-mtk-sch.c b/drivers/usb/host/xhci-mtk-sch.c
index fa33d6e..46fe0a2 100644
--- a/drivers/usb/host/xhci-mtk-sch.c
+++ b/drivers/usb/host/xhci-mtk-sch.c@@ -73,12 +73,17 @@ static void setup_sch_info(struct usb_device *udev, u32 max_burst; u32 mult; u32 esit_pkts; + u32 max_esit_payload; ep_type = CTX_TO_EP_TYPE(le32_to_cpu(ep_ctx->ep_info2)); ep_interval = CTX_TO_EP_INTERVAL(le32_to_cpu(ep_ctx->ep_info)); max_packet_size = MAX_PACKET_DECODED(le32_to_cpu(ep_ctx->ep_info2)); max_burst = CTX_TO_MAX_BURST(le32_to_cpu(ep_ctx->ep_info2)); mult = CTX_TO_EP_MULT(le32_to_cpu(ep_ctx->ep_info)); + max_esit_payload = + (CTX_TO_MAX_ESIT_PAYLOAD_HI( + le32_to_cpu(ep_ctx->ep_info)) << 16) | + CTX_TO_MAX_ESIT_PAYLOAD(le32_to_cpu(ep_ctx->tx_info)); sch_ep->esit = 1 << ep_interval; sch_ep->offset = 0;
@@ -105,7 +110,15 @@ static void setup_sch_info(struct usb_device *udev, } else if (udev->speed == USB_SPEED_SUPER) { /* usb3_r1 spec section4.4.7 & 4.4.8 */ sch_ep->cs_count = 0; - esit_pkts = (mult + 1) * (max_burst + 1); + /* + * some device's (d)wBytesPerInterval is set as 0, + * then max_esit_payload is 0, so evaluate esit_pkts from + * mult and burst + */ + esit_pkts = DIV_ROUND_UP(max_esit_payload, max_packet_size); + if (esit_pkts == 0) + esit_pkts = (mult + 1) * (max_burst + 1); + if (ep_type == INT_IN_EP || ep_type == INT_OUT_EP) { sch_ep->pkts = esit_pkts; sch_ep->num_budget_microframes = 1;
--
1.9.1