* Kishon Vijay Abraham I [off-list ref] [180808 06:35]:

On Tuesday 05 June 2018 07:35 PM, Rob Herring wrote:

quoted

Really need 64-bit addresses and sizes? Use ranges to limit the
address space if possible.

We now have address-cells as <1>,
https://git.kernel.org/pub/scm/linux/kernel/git/next/linux-next.git/tree/arch/arm64/boot/dts/ti/k3-am65.dtsi#n49

However each PCIe instance has 2 data regions and one of the regions
(PCIE0_CORE_CORE_DAT_SLV_PCIE_DAT1/PCIE1_CORE_CORE_DAT_SLV_PCIE_DAT1 specified
in the "MAIN Domain Memory Map" table of TRM http://www.ti.com/lit/pdf/spruid7)
is above the 32bit region and requires 2 cells to specify the start address.
This region is used to access MEM_SPACE of PCIe endpoint when operating in root
complex mode and access memory of PCI root complex when operating in endpoint mode.

In order to describe this, should we change the address-cells back to <2> or do
you suggest any other alternatives?

It's probably best to have the top level cbass interconnect use
#size-cells = <2> and then have it's child interconnects have
#size-cells = <1> if they don't need ranges above 4GB.

BTW, what's the difference between all these three similar PCIE
ranges?

PCIE0_CORE_CORE_DAT_SLV_PCIE_CORE 0x0005500000 0x0005600000 1 MB
PCIE1_CORE_CORE_DAT_SLV_PCIE_CORE 0x0005600000 0x0005700000 1 MB

PCIE0_CORE_CORE_DAT_SLV_PCIE_DAT0 0x0010000000 0x0018000000 128 MB
PCIE1_CORE_CORE_DAT_SLV_PCIE_DAT0 0x0018000000 0x0020000000 128 MB

PCIE0_CORE_CORE_DAT_SLV_PCIE_DAT1 0x4000000000 0x4100000000 4 GB
PCIE1_CORE_CORE_DAT_SLV_PCIE_DAT1 0x4100000000 0x4200000000 4 GB

Regards,

Tony