Re: [PATCH v5 1/6] dt-bindings: power: reset: Add qcom pon binding
From: Sebastian Reichel <hidden>
Date: 2018-07-06 13:57:59
Hi, On Thu, Jun 28, 2018 at 08:38:45PM +0530, Vinod Koul wrote:
The Power On device for Qcom PM 8xxx is a MFD supporting pwrkey and resin along with the Android reboot-mode. Add the binding describing this. Suggested-by: Bjorn Andersson <redacted> Reviewed-by: Bjorn Andersson <redacted> Signed-off-by: Vinod Koul <vkoul@kernel.org> ---
Thanks, queued to power-supply-next. -- Sebastian
quoted hunk ↗ jump to hunk
.../devicetree/bindings/power/reset/qcom,pon.txt | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/reset/qcom,pon.txtdiff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt new file mode 100644 index 000000000000..f32cdd358267 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt@@ -0,0 +1,35 @@ +Qualcomm PON Device + +The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey +along with the Android reboot-mode. + +This DT node has pwrkey as sub node. + +Required Properties: +-compatible: "qcom,pm8916-pon" +-reg: Specifies the physical address of the pon register + +Optional subnode: +-pwrkey: Specifies the subnode pwrkey and should follow the + qcom,pm8941-pwrkey.txt description. + +The rest of the properties should follow the generic reboot-mode description +found in reboot-mode.txt + +Example: + + pon@800 { + compatible = "qcom,pm8916-pon"; + + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + };-- 2.14.4
Attachments
- signature.asc [application/pgp-signature] 833 bytes