Thread (8 messages) 8 messages, 3 authors, 2018-08-14
STALE2861d
Revisions (2)
  1. v4 [diff vs current]
  2. v5 current

[PATCH v5 5/5] rtc: isl1219: add device tree docu

From: Denis OSTERLAND <hidden>
Date: 2018-07-24 11:41:13
Also in: linux-rtc, lkml
Subsystem: open firmware and flattened device tree bindings, real time clock (rtc) subsystem, the rest · Maintainers: Rob Herring, Krzysztof Kozlowski, Conor Dooley, Alexandre Belloni, Linus Torvalds

From: Denis Osterland <redacted>

The devicetree documentation for the ISL1219 device tree
binding is added with an short example. It is not a trivial
device, because it supports two interrupt sources.

Signed-off-by: Denis Osterland <redacted>
---
 .../devicetree/bindings/rtc/isil,isl1219.txt  | 29 +++++++++++++++++++
 1 file changed, 29 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/rtc/isil,isl1219.txt
diff --git a/Documentation/devicetree/bindings/rtc/isil,isl1219.txt b/Documentation/devicetree/bindings/rtc/isil,isl1219.txt
new file mode 100644
index 000000000000..c3efd48e91c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/isil,isl1219.txt
@@ -0,0 +1,29 @@
+Intersil ISL1219 I2C RTC/Alarm chip with event in
+
+ISL1219 has additional pins EVIN and #EVDET for tamper detection.
+
+Required properties supported by the device:
+
+ - "compatible": must be "isil,isl1219"
+ - "reg": I2C bus address of the device
+
+Optional properties:
+
+ - "interrupt-names": list which may contains "irq" and "evdet"
+ - "interrupts": list of interrupts for "irq" and "evdet"
+ - "isil,ev-evienb": if present EV.EVIENB bit is set to the specified
+                     value for proper operation.
+
+
+Example isl1219 node with #IRQ pin connected to SoC gpio1 pin12
+ and #EVDET pin connected to SoC gpio2 pin 24:
+
+	isl1219: rtc@68 {
+		compatible = "isil,isl1219";
+		reg = <0x68>;
+		interrupt-names = "irq", "evdet";
+		interrupts-extended = <&gpio1 12 IRQ_TYPE_EDGE_FALLING>,
+			<&gpio2 24 IRQ_TYPE_EDGE_FALLING>;
+		isil,ev-evienb = <1>;
+	};
+
-- 
2.18.0



Diehl Connectivity Solutions GmbH
Geschäftsführung: Horst Leonberger
Sitz der Gesellschaft: Nürnberg - Registergericht: Amtsgericht
Nürnberg: HRB 32315
___________________________________________________________________________________________________

Der Inhalt der vorstehenden E-Mail ist nicht rechtlich bindend. Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen.
Informieren Sie uns bitte, wenn Sie diese E-Mail faelschlicherweise erhalten haben. Bitte loeschen Sie in diesem Fall die Nachricht.
Jede unerlaubte Form der Reproduktion, Bekanntgabe, Aenderung, Verteilung und/oder Publikation dieser E-Mail ist strengstens untersagt.
The contents of the above mentioned e-mail is not legally binding. This e-mail contains confidential and/or legally protected information. Please inform us if you have received this e-mail by
mistake and delete it in such a case. Each unauthorized reproduction, disclosure, alteration, distribution and/or publication of this e-mail is strictly prohibited. 
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help