Thread (24 messages) 24 messages, 5 authors, 2018-07-23

Re: [PATCH v3 00/18] arm64: allwinner: Add A64 DE2 HDMI support

From: Icenowy Zheng <hidden>
Date: 2018-07-23 06:33:36
Also in: dri-devel, linux-arm-kernel, linux-clk, lkml

在 2018-07-18三的 18:26 +0530,Jagan Teki写道:
On Wed, Jul 18, 2018 at 6:14 PM, Maxime Ripard
[off-list ref] wrote:
quoted
On Wed, Jul 18, 2018 at 04:24:40PM +0530, Jagan Teki wrote:
quoted
Allwinner A64 has display engine pipeline like other Allwinner
SOC's A83T/H3/H5.

A64 behaviour similar to Allwinner A83T where
Mixer0 => TCON0 => LVDS/RGB/MIPI-DSI
Mixer1 => TCON1 => HDMI
as per Display System Block Diagram from
Allwinner_A64_User_Manual_V1.1.pdf

This is third patch-set followed with previous RFC[1], first and
second
series[2][3] and merely concentrated on HDMI pipeline through
TCON1 and
rest will add eventually.

This series fixed previous version comments
- Rebasing on linux-next
- sqash all pipeline components in one patch
- Enable all pipeline components in board dts
- about documenting fallback compatibles
- adding new compatible for mixer1
You still haven't figured out the SRAM parts. We asked you to fix
this
in the v1 and the v2 already, and we're not going to merge this
without those bits figured out properly.
Sorry I'm not sure what I'm trying to do on SRAM here because the
last
mail, I have waited for Icenowy changes about simple_fb with sram_c
on
ccu node and those are merged. can you elaborate please.
Would you mind me advance the patchset a bit and send a PATCH v3.1?

I won't finally take the maintainership of the patchset.
quoted
quoted
Log:
[    1.450984] Jagan: sun8i_mixer_probe
[    1.464981] sun4i-drm display-engine: bound 1200000.mixer (ops
sun8i_mixer_ops)
[    1.472572] sun4i-drm display-engine: bound 1c0d000.lcd-
controller (ops sun4i_tcon_ops)
[    1.480676] sun8i-dw-hdmi 1ee0000.hdmi: Linked as a consumer
to regulator.10
[    1.488738] sun8i-dw-hdmi 1ee0000.hdmi: Detected HDMI TX
controller v1.32a with HDCP (sun8i_dw_hdmi_phy)
[    1.498879] sun8i-dw-hdmi 1ee0000.hdmi: registered DesignWare
HDMI I2C bus driver
[    1.507372] sun4i-drm display-engine: bound 1ee0000.hdmi (ops
sun8i_dw_hdmi_ops)
[    1.514778] [drm] Supports vblank timestamp caching Rev 2
(21.10.2013).
[    1.521398] [drm] No driver support for vblank timestamp
query.
[    1.684611] random: fast init done
[    2.011575] Console: switching to colour frame buffer device
180x56
[    2.049858] sun4i-drm display-engine: fb0: DRM emulated frame
buffer device
[    2.057268] [drm] Initialized sun4i-drm 1.0.0 20150629 for
display-engine on minor 0

Note:
Pine64 boards are unable to get edid by default like other A64
boards,
but forcing 'video=HDMI-A-1:1920x1080@60D' kernel command line
can
create edid with display on penel
Then that needs to be figured out before it's enabled, instead of
having a hack that barely works.
Any suggestion to work.
-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help