[PATCH v2 3/3] arm64: allwinner: h6: enable MMC0/2 on Pine H64
From: Icenowy Zheng <icenowy@aosc.io>
Date: 2018-07-19 04:30:14
Also in:
linux-arm-kernel, linux-mmc, lkml
Subsystem:
arm/allwinner sunxi soc support, the rest · Maintainers:
Chen-Yu Tsai, Jernej Skrabec, Samuel Holland, Linus Torvalds
The Pine H64 board have a MicroSD slot connected to MMC0 controller of the H6 SoC and a eMMC slot connected to MMC2. Enable them in the device tree. Signed-off-by: Icenowy Zheng <icenowy@aosc.io> --- Changes in v2: - Use real regulator instead of dummy regulator. .../boot/dts/allwinner/sun50i-h6-pine-h64.dts | 18 ++++++++++++++++++ 1 file changed, 18 insertions(+)
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
index 1673636358ef..ceffc40810ee 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h6-pine-h64.dts@@ -41,6 +41,24 @@ }; }; +&mmc0 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc0_pins>; + vmmc-supply = <®_cldo1>; + cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + +&mmc2 { + pinctrl-names = "default"; + pinctrl-0 = <&mmc2_pins>; + vmmc-supply = <®_cldo1>; + vqmmc-supply = <®_bldo2>; + non-removable; + cap-mmc-hw-reset; + status = "okay"; +}; + &r_i2c { status = "okay";
--
2.17.1