[PATCH 4/5] mips: dts: mscc: Add spi on Ocelot
From: Alexandre Belloni <alexandre.belloni@bootlin.com>
Date: 2018-07-17 14:23:40
Also in:
linux-mips, linux-spi, lkml
Subsystem:
microsemi mips socs, mips, the rest · Maintainers:
Alexandre Belloni, Thomas Bogendoerfer, Linus Torvalds
Add support for the SPI controller Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- arch/mips/boot/dts/mscc/ocelot.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+)
diff --git a/arch/mips/boot/dts/mscc/ocelot.dtsi b/arch/mips/boot/dts/mscc/ocelot.dtsi
index 4f33dbc67348..f7616a476247 100644
--- a/arch/mips/boot/dts/mscc/ocelot.dtsi
+++ b/arch/mips/boot/dts/mscc/ocelot.dtsi@@ -91,6 +91,17 @@ status = "disabled"; }; + spi: spi@101000 { + compatible = "mscc,ocelot-spi", "snps,dw-apb-ssi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x101000 0x100>, <0x3c 0x18>; + interrupts = <9>; + clocks = <&ahb_clk>; + + status = "disabled"; + }; + switch@1010000 { compatible = "mscc,vsc7514-switch"; reg = <0x1010000 0x10000>,
--
2.18.0