Op 17 jul. 2018, om 08:36 heeft Tony Lindgren [off-list ref] het volgende geschreven:
* Koen Kooi [off-list ref] [180717 06:28]:
quoted
+&i2c0 {
+ lps331ap: barometer@5c {
+ compatible = "st,lps331ap-press";
+ st,drdy-int-pin = <1>;
+ reg = <0x5c>;
+ interrupt-parent = <&gpio1>;
+ interrupts = <26 IRQ_TYPE_EDGE_RISING>;
+ };
+
+ mpu6050: accelerometer@68 {
+ compatible = "invensense,mpu6050";
+ reg = <0x68>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <2 IRQ_TYPE_EDGE_RISING>;
+ orientation = <0xff 0 0 0 1 0 0 0 0xff>;
+ };
+
+ usb2512b@2c {
+ compatible = "microchip,usb2512b";
+ reg = <0x2c>;
+ reset-gpios = <&gpio0 29 GPIO_ACTIVE_LOW>;
+ /* wifi on port 4 */
+ };
+};
Thanks for updating it, should the last one be usb-hub@2c?
Yes, it should be. Never update patches halfway through your first morning coffee :) V6 coming up!
regards,
Koen