于 2018年7月10日 GMT+08:00 下午8:29:22, Maxime Ripard [off-list ref] 写到:

On Mon, Jul 09, 2018 at 03:20:54PM +0000, Corentin Labbe wrote:

quoted

Hello

With Moeicenowy's agreement, I have take leadership ot this patchset.

There are no really changes appart renaming struct quirck to variant.

Since the last serie is really old, I will answer comment here.
The two regulator (1.2 and 2.5V) are not for the PHY since:
- nothing in the schematic said that they are for the PHY, they seems
  only for controller
- all other AHCI driver use 5V for the target/PHY (vs 1.2/2.5 which
  cannot be used for target)

That's a pretty bad thing to do, especially for old series. You just
dropped all the context that you reply to, and there's no way for any
reviewer to tell if your answers make any kind of sense, or addresses
any question one might have had.

quoted

Furthermore, the AHCI binding support only one regulator per PHY, so
using the "target" regulator is out of question for registring this

two

quoted

non-phy regulator.

Nothing is "out of question", we have the source code and can change
it if needed.

The main problem is that he misunderstood the meaning
of target regulator -- it's not for PHY but for disk. And if a
device is designed to accept both 2.5" and 3.5" HDD at
the same port multiple target regulator might really
be useful -- one 5v and one 12v.

Maxime

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.