[PATCH 2/2] arm64: dts: mt7622: update a clock property for UART0
From: Ryder Lee <ryder.lee@mediatek.com>
Date: 2018-07-10 07:56:02
Also in:
linux-arm-kernel, linux-mediatek, lkml
Subsystem:
arm/mediatek soc support, the rest · Maintainers:
Matthias Brugger, AngeloGioacchino Del Regno, Linus Torvalds
The input clock of UART0 should be CLK_PERI_UART0_PD. Signed-off-by: Ryder Lee <ryder.lee@mediatek.com> --- arch/arm64/boot/dts/mediatek/mt7622.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/mediatek/mt7622.dtsi b/arch/arm64/boot/dts/mediatek/mt7622.dtsi
index 8cdec52..4caa9b4 100644
--- a/arch/arm64/boot/dts/mediatek/mt7622.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7622.dtsi@@ -367,7 +367,7 @@ reg = <0 0x11002000 0 0x400>; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_LOW>; clocks = <&topckgen CLK_TOP_UART_SEL>, - <&pericfg CLK_PERI_UART1_PD>; + <&pericfg CLK_PERI_UART0_PD>; clock-names = "baud", "bus"; status = "disabled"; };
--
1.9.1