Re: [[DPU]PATCH] drm/msm/dsi: move the API setting PLL src to modeset_init()

On Wed, Jun 27, 2018 at 2:48 PM, Doug Anderson [off-list ref] wrote:

Hi,

On Tue, Jun 26, 2018 at 10:27 AM, Rob Clark [off-list ref] wrote:

quoted

On Tue, Jun 26, 2018 at 11:55 AM, Doug Anderson [off-list ref] wrote:

quoted

Hi,

On Mon, Jun 25, 2018 at 9:45 PM, Sandeep Panda [off-list ref] wrote:

quoted

From: Abhinav Kumar <redacted>

Setting the DSI PLL src in probe doesn't provide the clock
driver sufficient time to reclaim unused clock resources
from coreboot resulting in warnings from clock driver.

Move the DSI PLL src setting to modeset_init() so that the
clock driver can claim unused display clock resources before
the display driver requests for them again.

IMHO this is a bad design.  Sean and Stephen can feel free to override
me, but I think the clock driver should be improved to handle this
case and not require the clock to get disabled before Linux enables
it.

I experimented with it a while back[1] (in this case w/ lk lighting up
the display).  In that case I needed both the clk and gdsc code to
realize that clks/gdsc's were on at boot, and fixup the refcnt of the
clks (and parent clocks and so on).  And then when probed the display
driver would check if clocks were enabled to decide to readback the
state from the hw.  (Maybe you can short-circuit some of that if you
only care about DSI panels with a single fixed resolution, but as soon
as external displays come into the picture you can't assume so much
about the hw  state.)

BR,
-R

[1] https://github.com/freedreno/kernel-msm/commits/display-handover

It seems like something like that is the right real solution here, but
I guess someone needs to step up and work on it.

yeah, sadly I haven't found time to revisit it (kinda been short on
time to work on display/kernel side of things.. it would be helpful if
qcom would stop coming out with new gpu's so often :-P)

But I am pretty sure if we want a general solution that can also deal
w/ splash screen on hot-pluggable display, and not just the simpler
case of fixed resolution dsi panels, it is going to require
cooperation between clk/gdsc and display driver.

...in general I'm wary of any patch that will not work when
"clk_ignore_unused" is passed as a command line parameter.  It's
useful to be able to use this command line parameter for debugging
sometimes and it would be unfortunate if doing so spewed a bunch of
extra warnings.

for "full distro" config where all the display drivers are built as
modules and prior to real display driver loading you have kernel
inheriting the display via efifb or simplefb, I think we need to be
able to flag certain clocks and power domains (and on other platforms,
perhaps regulators) as "if the bootloader left this on, keep it that
way"..  I guess for simple-fb we could perhaps solve it by attaching
power domains and clks to the simple-fb node, but that doesn't really
work for efifb..

BR,
-R

On a side node, it appears that even without ${SUBJECT} patch the
warnings seem to have gone away with the latest stack of patches I've
been testing.  The warnings don't even come back with
"clk_ignore_unused".  I haven't personally dug into why, but I figured
I'd mention it.


-Doug

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel