On Mon, Mar 5, 2018 at 3:34 PM, Maxime Ripard [off-list ref] wrote:

Hi,

The H3 and H5 have a CSI controller based on the one previously found
in the A31, that is currently supported by the sun6i-csi driver.

Add the compatibles to the device tree bindings and to the driver to
make it work properly.

This obviously depends on the serie "Initial Allwinner V3s CSI
Support" by Yong Deng.

Let me know what you think,
Maxime

Maxime Ripard (2):
  dt-bindings: media: sun6i: Add A31 and H3 compatibles
  media: sun6i: Add A31 compatible

Mylène Josserand (2):
  ARM: dts: sun8i: Add the H3/H5 CSI controller
  [DO NOT MERGE] ARM: dts: sun8i: Add CAM500B camera module to the Nano
    Pi M1+

Just trying to understand what interface has been tested with npi-m1+,
is it DVP (parallel) interface? I've Bananapi 5MP[1] and trying to
test on top, and look like its MIPI CSI2. I guess Yong patch[2]
doesn't support CSI2 yet, am I correct?

[1] https://www.amazon.in/Generic-V3-0-BPI-M3-camera-chipset/dp/B0727N5CD1
[2] https://patchwork.kernel.org/patch/10380067/

Jagan.

-- 
Jagan Teki
Senior Linux Kernel Engineer | Amarula Solutions
U-Boot, Linux | Upstream Maintainer
Hyderabad, India.

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel