[RFC 4/5] ARM: dts: AM35x: Change MUSB from omap2430 to am35xx

[RFC 0/5] Migrate AM35xx MUSB glue to device tree and enable MUSB · Adam Ford <hidden> · 2018-06-25
[RFC 1/5] usb: musb: am35x: Add device tree support · Adam Ford <hidden> · 2018-06-25
[RFC 2/5] usb: musb: am35x: Match clock assignements to hwmods · Adam Ford <hidden> · 2018-06-25
[RFC 3/5] ARM: OMAP2+: Add AM3517 MUSB setup to pdata quirks. · Adam Ford <hidden> · 2018-06-25
Re: [RFC 3/5] ARM: OMAP2+: Add AM3517 MUSB setup to pdata quirks. · Tony Lindgren <tony@atomide.com> · 2018-07-03
[RFC 4/5] ARM: dts: AM35x: Change MUSB from omap2430 to am35xx · Adam Ford <hidden> · 2018-06-25
[RFC 5/5] ARM: dts: am3517-evm: Enable MUSB on AM3517-evm · Adam Ford <hidden> · 2018-06-25
Re: [RFC 0/5] Migrate AM35xx MUSB glue to device tree and enable MUSB · Tony Lindgren <tony@atomide.com> · 2018-07-03

From: Adam Ford <hidden>
Date: 2018-06-25 00:12:32
Also in: linux-arm-kernel, linux-omap, linux-usb
Subsystem: the rest · Maintainer: Linus Torvalds

The glue that connects the AM35xx is not the same as the OMAP3.
With the AM35xx-MUSB now available in device tree, point to that
glue instead of omap3.

Signed-off-by: Adam Ford <redacted>

diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index ca294914bbb1..c17cfe6a2132 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi

@@ -18,7 +18,7 @@
 
 	ocp@68000000 {
 		am35x_otg_hs: am35x_otg_hs@5c040000 {
-			compatible = "ti,omap3-musb";
+			compatible = "ti,am35xx-musb";
 			ti,hwmods = "am35x_otg_hs";
 			status = "disabled";
 			reg = <0x5c040000 0x1000>;

-- 
2.17.1

`h`	back out one level
`j`	next message in thread
`k`	previous message in thread
`l`	drill in
`Esc`	close help / fold thread tree
`?`	toggle this help