[PATCH v8 6/6] ARM: dts: tegra: enable NAND flash on Colibri T20
From: Stefan Agner <stefan@agner.ch>
Date: 2018-06-24 21:28:55
Also in:
linux-tegra, lkml
Subsystem:
the rest · Maintainer:
Linus Torvalds
This enables the on-module ONFI conformant NAND flash. Signed-off-by: Lucas Stach <dev@lynxeye.de> Signed-off-by: Stefan Agner <stefan@agner.ch> --- arch/arm/boot/dts/tegra20-colibri-512.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+)
diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi
index 5c202b3e3bb1d..0c283fb772148 100644
--- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi
+++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi@@ -462,6 +462,22 @@ }; }; + nand-controller@70008000 { + status = "okay"; + + nand@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <1>; + nand-bus-width = <8>; + nand-on-flash-bbt; + nand-ecc-algo = "bch"; + nand-is-boot-medium; + nand-ecc-maximize; + wp-gpios = <&gpio TEGRA_GPIO(S, 0) GPIO_ACTIVE_LOW>; + }; + }; + usb@c5004000 { status = "okay"; nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1)
--
2.17.1