[PATCH v4 22/26] devicetree: fix name of pinctrl-bindings.txt
From: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Date: 2018-06-15 16:35:06
Also in:
linux-doc, linux-gpio, linux-mmc, linux-serial, linux-spi, lkml
Subsystem:
media input infrastructure (v4l/dvb), multifunction devices (mfd), multimedia card (mmc), secure digital (sd) and sdio subsystem, open firmware and flattened device tree bindings, pin control subsystem, spi subsystem, the rest, tty layer and serial drivers · Maintainers:
Mauro Carvalho Chehab, Lee Jones, Ulf Hansson, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Mark Brown, Linus Torvalds, Greg Kroah-Hartman, Jiri Slaby
Rename: pinctrl-binding.txt -> pinctrl-bindings.txt In order to match the current name of this file. Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> --- Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt | 2 +- Documentation/devicetree/bindings/mfd/as3722.txt | 2 +- .../devicetree/bindings/mmc/microchip,sdhci-pic32.txt | 2 +- Documentation/devicetree/bindings/mmc/sdhci-st.txt | 2 +- .../devicetree/bindings/pinctrl/pinctrl-max77620.txt | 4 ++-- .../devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt | 4 ++-- Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt | 4 ++-- .../devicetree/bindings/serial/microchip,pic32-uart.txt | 2 +- Documentation/devicetree/bindings/spi/spi-st-ssc.txt | 2 +- 9 files changed, 12 insertions(+), 12 deletions(-)
diff --git a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
index c7888d6f6408..880d4d70c9fd 100644
--- a/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt
+++ b/Documentation/devicetree/bindings/media/stih407-c8sectpfe.txt@@ -28,7 +28,7 @@ See: Documentation/devicetree/bindings/clock/clock-bindings.txt - pinctrl-names : a pinctrl state named tsin%d-serial or tsin%d-parallel (where %d is tsin-num) must be defined for each tsin child node. - pinctrl-0 : phandle referencing pin configuration for this tsin configuration -See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt +See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt Required properties (tsin (child) node):
diff --git a/Documentation/devicetree/bindings/mfd/as3722.txt b/Documentation/devicetree/bindings/mfd/as3722.txt
index 0b2a6099aa20..5297b2210704 100644
--- a/Documentation/devicetree/bindings/mfd/as3722.txt
+++ b/Documentation/devicetree/bindings/mfd/as3722.txt@@ -46,7 +46,7 @@ is required: Following properties are require if pin control setting is required at boot. - pinctrl-names: A pinctrl state named "default" be defined, using the - bindings in pinctrl/pinctrl-binding.txt. + bindings in pinctrl/pinctrl-bindings.txt. - pinctrl[0...n]: Properties to contain the phandle that refer to different nodes of pin control settings. These nodes represents the pin control setting of state 0 to state n. Each of these
diff --git a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
index 3149297b3933..f064528effed 100644
--- a/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt
+++ b/Documentation/devicetree/bindings/mmc/microchip,sdhci-pic32.txt@@ -12,7 +12,7 @@ Required properties: See: Documentation/devicetree/bindings/clock/clock-bindings.txt - pinctrl-names: A pinctrl state names "default" must be defined. - pinctrl-0: Phandle referencing pin configuration of the SDHCI controller. - See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt Example:
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-st.txt b/Documentation/devicetree/bindings/mmc/sdhci-st.txt
index 6b3d40ca395e..ccf82b4ee838 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-st.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-st.txt@@ -20,7 +20,7 @@ Required properties: - pinctrl-names: A pinctrl state names "default" must be defined. - pinctrl-0: Phandle referencing pin configuration of the sd/emmc controller. - See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt - reg: This must provide the host controller base address and it can also contain the FlashSS Top register for TX/RX delay used by the driver
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt
index ad4fce3552bb..511fc234558b 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-max77620.txt@@ -11,9 +11,9 @@ Optional Pinmux properties: -------------------------- Following properties are required if default setting of pins are required at boot. -- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>. +- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>. - pinctrl[0...n]: Properties to contain the phandle for pinctrl states per - <pinctrl-binding.txt>. + <pinctrl-bindings.txt>. The pin configurations are defined as child of the pinctrl states node. Each sub-node have following properties:
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
index a677145ae6d1..625a22e2f211 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mcp23s08.txt@@ -101,9 +101,9 @@ Optional Pinmux properties: -------------------------- Following properties are required if default setting of pins are required at boot. -- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>. +- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>. - pinctrl[0...n]: Properties to contain the phandle for pinctrl states per - <pinctrl-binding.txt>. + <pinctrl-bindings.txt>. The pin configurations are defined as child of the pinctrl states node. Each sub-node have following properties:
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
index eee3dc260934..cbcbd31e3ce8 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-rk805.txt@@ -10,9 +10,9 @@ Optional Pinmux properties: -------------------------- Following properties are required if default setting of pins are required at boot. -- pinctrl-names: A pinctrl state named per <pinctrl-binding.txt>. +- pinctrl-names: A pinctrl state named per <pinctrl-bindings.txt>. - pinctrl[0...n]: Properties to contain the phandle for pinctrl states per - <pinctrl-binding.txt>. + <pinctrl-bindings.txt>. The pin configurations are defined as child of the pinctrl states node. Each sub-node have following properties:
diff --git a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
index 7a34345d0ca3..c8dd440e9747 100644
--- a/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt
+++ b/Documentation/devicetree/bindings/serial/microchip,pic32-uart.txt@@ -8,7 +8,7 @@ Required properties: See: Documentation/devicetree/bindings/clock/clock-bindings.txt - pinctrl-names: A pinctrl state names "default" must be defined. - pinctrl-0: Phandle referencing pin configuration of the UART peripheral. - See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt + See: Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt Optional properties: - cts-gpios: CTS pin for UART
diff --git a/Documentation/devicetree/bindings/spi/spi-st-ssc.txt b/Documentation/devicetree/bindings/spi/spi-st-ssc.txt
index fe54959ec957..1bdc4709e474 100644
--- a/Documentation/devicetree/bindings/spi/spi-st-ssc.txt
+++ b/Documentation/devicetree/bindings/spi/spi-st-ssc.txt@@ -9,7 +9,7 @@ Required properties: - clocks : Must contain an entry for each name in clock-names See ../clk/* - pinctrl-names : Uses "default", can use "sleep" if provided - See ../pinctrl/pinctrl-binding.txt + See ../pinctrl/pinctrl-bindings.txt Optional properties: - cs-gpios : List of GPIO chip selects
--
2.17.1