Re: [PATCH v10 0/2] Initial Allwinner V3s CSI Support

On Tue, May 29, 2018 at 11:57:57AM +0200, Maxime Ripard wrote:

On Thu, May 17, 2018 at 11:02:24AM +0200, Maxime Ripard wrote:

quoted

On Fri, May 04, 2018 at 02:44:08PM +0800, Yong Deng wrote:

quoted

This patchset add initial support for Allwinner V3s CSI.

Allwinner V3s SoC features two CSI module. CSI0 is used for MIPI CSI-2
interface and CSI1 is used for parallel interface. This is not
documented in datasheet but by test and guess.

This patchset implement a v4l2 framework driver and add a binding 
documentation for it. 

Currently, the driver only support the parallel interface. And has been
tested with a BT1120 signal which generating from FPGA. The following
fetures are not support with this patchset:
  - ISP 
  - MIPI-CSI2
  - Master clock for camera sensor
  - Power regulator for the front end IC

I tested it on my H3 with a parallel camera, and it still works. Thanks!

Hans, Sakari, any chance this might land in 4.18?

Ping?

I'll try to look into this soonish but it seems to be too late for 4.18.
Sorry about that.

-- 
Sakari Ailus
sakari.ailus@linux.intel.com