From: Subhash Jadavani <redacted>

UFS host supplies the reference clock to UFS device and UFS device
specification allows host to provide one of the 4 frequencies (19.2 MHz,
26 MHz, 38.4 MHz, 52 MHz) for reference clock. Host should set the
device reference clock frequency setting in the device based on what
frequency it is supplying to UFS device.

Signed-off-by: Subhash Jadavani <redacted>
[cang@codeaurora.org: Resolved trivial merge conflicts]
Signed-off-by: Can Guo <redacted>
Signed-off-by: Sayali Lokhande <redacted>
---
 .../devicetree/bindings/ufs/ufshcd-pltfrm.txt      |  8 +++
 drivers/scsi/ufs/ufs.h                             |  9 ++++
 drivers/scsi/ufs/ufshcd-pltfrm.c                   | 20 ++++++++
 drivers/scsi/ufs/ufshcd.c                          | 60 ++++++++++++++++++++++
 drivers/scsi/ufs/ufshcd.h                          |  2 +
 5 files changed, 99 insertions(+)

diff --git a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
index c39dfef..ac94220 100644
--- a/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt
+++ b/Documentation/devicetree/bindings/ufs/ufshcd-pltfrm.txt

@@ -41,6 +41,12 @@ Optional properties:
 -lanes-per-direction	: number of lanes available per direction - either 1 or 2.
 			  Note that it is assume same number of lanes is used both
 			  directions at once. If not specified, default is 2 lanes per direction.
+- dev-ref-clk-freq	: Specify the device reference clock frequency, must be one of the following:
+			  0: 19.2 MHz
+			  1: 26 MHz
+			  2: 38.4 MHz
+			  3: 52 MHz
+			  Defaults to 26 MHz if not specified.