Re: [PATCH v2 0/2] Add support for QCOM cpufreq FW driver

On 19-05-18, 23:04, Taniya Das wrote:

 [v2]
   * Address comments given in v0 series.

That's not how you do it. You need to explain every change in enough
detail here so that the reviewers don't need to go to their previous
emails to see what changed.

 [v1]
    * Fixed compilation reported by Amit K.

The CPUfreq FW present in some QCOM chipsets offloads the steps necessary
for changing the frequency of CPUs. The driver implements the cpufreq
driver interface for this firmware.

Taniya Das (2):
  dt-bindings: cpufreq: Introduce QCOM CPUFREQ FW bindings
  cpufreq: qcom-fw: Add support for QCOM cpufreq FW driver

 .../bindings/cpufreq/cpufreq-qcom-fw.txt           |  68 +++++
 drivers/cpufreq/Kconfig.arm                        |   9 +
 drivers/cpufreq/Makefile                           |   1 +
 drivers/cpufreq/qcom-cpufreq-fw.c                  | 317 +++++++++++++++++++++
 4 files changed, 395 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/cpufreq/cpufreq-qcom-fw.txt
 create mode 100644 drivers/cpufreq/qcom-cpufreq-fw.c

--
Qualcomm INDIA, on behalf of Qualcomm Innovation Center, Inc.is a member
of the Code Aurora Forum, hosted by the  Linux Foundation.

-- 
viresh