Thread (111 messages) 111 messages, 10 authors, 2018-04-11

Re: simultaneous voice/data works (was Re: call/normal switch was Re: omap4-droid4: voice call support was)

From: Pavel Machek <hidden>
Date: 2018-04-08 07:41:28
Also in: alsa-devel, linux-omap, lkml

Hi!
quoted
mmcli -m 0 --enable
mmcli -m 0  --location-enable-gps-nmea
watch -n .3 sudo mmcli -m 0  --location-get-gps-nmea

...can be used to get GPS data. Droid4 seems to have rather bad GPS,
so you should probably put it near window for testing.

Is there way to grab data from modemmanager and feed it to gpsd, so
that normal applications can access gps? I don't see easy way.

I tried --location-enable-gps-unmanaged , but that did not work for
me.
That requires a TTY that would spit out the GPS data; in this mode MM
only sends the start/stop commands, and what comes out the GPS TTY is
undefined (at least by MM).

So unless you know that one of the 6600's TTYs does GPS and in what
format it does GPS, then no.

Doesn't --location-get-gps-nmea work for you?  That will spit out the
latest NMEA traces MM gets from the modem, if it supports NMEA.  I
believe --location-status will tell you what methods MM supports with
the modem.
Yes, --location-get-gps-nmea works for me.

I guess one way forward would be to implement --location-get-gps-nmea
support for qmicli, and use that?

Best regards,
									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Attachments

Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help