Matheus Castello [off-list ref] hat am 22. Februar 2018 um 18:44 geschrieben:


Property to set initial value of pin output buffer.

Signed-off-by: Matheus Castello <matheus@castello.eng.br>
---
 .../bindings/pinctrl/brcm,bcm2835-gpio.txt         |  5 +-
 drivers/pinctrl/bcm/pinctrl-bcm2835.c              | 90 +++++++++++++++++-----
 2 files changed, 75 insertions(+), 20 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
index 2569866..6834f1d 100644
--- a/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt
+++ b/Documentation/devicetree/bindings/pinctrl/brcm,bcm2835-gpio.txt

@@ -54,8 +54,11 @@ Optional subnode-properties:
   0: none
   1: down
   2: up
+- brcm,level: Integer, representing the value of output buffer to apply to the pin(s):
+  0: low
+  1: high

 
-Each of brcm,function and brcm,pull may contain either a single value which
+Each of brcm,function, brcm,pull and brcm,level may contain either a single value which
 will be applied to all pins in brcm,pins, or 1 value for each entry in
 brcm,pins.
 

diff --git a/drivers/pinctrl/bcm/pinctrl-bcm2835.c b/drivers/pinctrl/bcm/pinctrl-bcm2835.c
index 785c366..0ace548 100644
--- a/drivers/pinctrl/bcm/pinctrl-bcm2835.c
+++ b/drivers/pinctrl/bcm/pinctrl-bcm2835.c

@@ -73,6 +73,8 @@
 enum bcm2835_pinconf_param {
 	/* argument: bcm2835_pinconf_pull */
 	BCM2835_PINCONF_PARAM_PULL,
+	/* argument: bcm2835_pinconf_level */
+	BCM2835_PINCONF_PARAM_LEVEL,
 };
 
 #define BCM2835_PINCONF_PACK(_param_, _arg_) ((_param_) << 16 | (_arg_))

@@ -725,16 +727,42 @@ static int bcm2835_pctl_dt_node_to_map_pull(struct bcm2835_pinctrl *pc,
 	return 0;
 }
 
+static int bcm2835_pctl_dt_node_to_map_level(struct bcm2835_pinctrl *pc,
+		struct device_node *np, u32 pin, u32 level,
+		struct pinctrl_map **maps)
+{
+	struct pinctrl_map *map = *maps;
+	unsigned long *configs;
+
+	if (level > 2) {
+		dev_err(pc->dev, "%pOF: invalid brcm,level %d\n", np, level);
+		return -EINVAL;
+	}
+
+	configs = kzalloc(sizeof(*configs), GFP_KERNEL);
+	if (!configs)
+		return -ENOMEM;
+	configs[0] = BCM2835_PINCONF_PACK(BCM2835_PINCONF_PARAM_LEVEL, level);
+
+	map->type = PIN_MAP_TYPE_CONFIGS_PIN;
+	map->data.configs.group_or_pin = bcm2835_gpio_pins[pin].name;
+	map->data.configs.configs = configs;
+	map->data.configs.num_configs = 1;
+	(*maps)++;
+
+	return 0;
+}
+
 static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
 		struct device_node *np,
 		struct pinctrl_map **map, unsigned *num_maps)
 {
 	struct bcm2835_pinctrl *pc = pinctrl_dev_get_drvdata(pctldev);
-	struct property *pins, *funcs, *pulls;
-	int num_pins, num_funcs, num_pulls, maps_per_pin;
+	struct property *pins, *funcs, *pulls, *levels;
+	int num_pins, num_funcs, num_pulls, num_levels, maps_per_pin;
 	struct pinctrl_map *maps, *cur_map;
 	int i, err;
-	u32 pin, func, pull;
+	u32 pin, func, pull, level;
 
 	pins = of_find_property(np, "brcm,pins", NULL);
 	if (!pins) {

@@ -744,6 +772,7 @@ static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
 
 	funcs = of_find_property(np, "brcm,function", NULL);
 	pulls = of_find_property(np, "brcm,pull", NULL);
+	levels = of_find_property(np, "brcm,level", NULL);
 
 	if (!funcs && !pulls) {
 		dev_err(pc->dev,

@@ -755,6 +784,7 @@ static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
 	num_pins = pins->length / 4;
 	num_funcs = funcs ? (funcs->length / 4) : 0;
 	num_pulls = pulls ? (pulls->length / 4) : 0;
+	num_levels = levels ? (levels->length / 4) : 0;
 
 	if (num_funcs > 1 && num_funcs != num_pins) {
 		dev_err(pc->dev,

@@ -770,11 +800,20 @@ static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
 		return -EINVAL;
 	}
 
+	if (num_levels > 1 && num_levels != num_pins) {
+		dev_err(pc->dev,
+			"%pOF: brcm,level must have 1 or %d entries\n",
+			np, num_pins);
+		return -EINVAL;
+	}
+
 	maps_per_pin = 0;
 	if (num_funcs)
 		maps_per_pin++;
 	if (num_pulls)
 		maps_per_pin++;
+	if (num_levels)
+		maps_per_pin++;
 	cur_map = maps = kzalloc(num_pins * maps_per_pin * sizeof(*maps),
 				GFP_KERNEL);
 	if (!maps)

@@ -811,6 +850,17 @@ static int bcm2835_pctl_dt_node_to_map(struct pinctrl_dev *pctldev,
 			if (err)
 				goto out;
 		}
+		if (num_levels) {
+			err = of_property_read_u32_index(np, "brcm,level",
+					(num_levels > 1) ? i : 0, &level);
+			if (err)
+				goto out;
+
+			err = bcm2835_pctl_dt_node_to_map_level(pc, np, pin,
+							level, &cur_map);
+			if (err)
+				goto out;
+		}
 	}
 
 	*map = maps;

@@ -931,23 +981,25 @@ static int bcm2835_pinconf_set(struct pinctrl_dev *pctldev,
 		param = BCM2835_PINCONF_UNPACK_PARAM(configs[i]);
 		arg = BCM2835_PINCONF_UNPACK_ARG(configs[i]);
 
-		if (param != BCM2835_PINCONF_PARAM_PULL)
+		if (param == BCM2835_PINCONF_PARAM_PULL) {
+			off = GPIO_REG_OFFSET(pin);
+			bit = GPIO_REG_SHIFT(pin);
+
+			bcm2835_gpio_wr(pc, GPPUD, arg & 3);
+			/*
+			* Docs say to wait 150 cycles, but not of what. We assume a
+			* 1 MHz clock here, which is pretty slow...
+			*/
+			udelay(150);
+			bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), BIT(bit));
+			udelay(150);
+			bcm2835_gpio_wr(pc, GPPUDCLK0 + (off * 4), 0);
+		} else if (param == BCM2835_PINCONF_PARAM_LEVEL) {
+			/* write in register */
+			bcm2835_gpio_set_bit(pc, arg ? GPSET0 : GPCLR0, pin);
+		} else {