Re: [PATCH v4 1/2] dt-bindings: usb: ehci: add optional external vbus supply property

On 06/03/18 01:57, Rob Herring wrote:

On Thu, Mar 01, 2018 at 10:51:38AM +0100, Amelie Delaunay wrote:

quoted

On some boards, especially when vbus supply requires large current,
and the charge pump on the PHY isn't enough, an external vbus power switch
per port may be used.
Add portN_vbus-supply property to usb-ehci bindings. As the number of ports
depends on the ehci controller, and the port on which an external vbus
supply depends on the platform, <portN> is used to make it generic.

Signed-off-by: Amelie Delaunay <redacted>
---
  Documentation/devicetree/bindings/usb/usb-ehci.txt | 1 +
  1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
index 3efde12..cd576db 100644
--- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
+++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt

@@ -19,6 +19,7 @@ Optional properties:
   - phys : phandle + phy specifier pair
   - phy-names : "usb"
   - resets : phandle + reset specifier pair
+ - portN_vbus-supply : phandle of regulator supplying vbus for port N

Just make this an array with the index being the port (and drop
"portN_").

Does that still work if there is an external supply for port 1 but none 
for port 0? I believe that was brought up as a possibility before.

Robin.