[PATCH 1/2] arm64: dts: rockchip: move rk3399-sapphire sdio to excavator baseboard
From: Heiko Stuebner <hidden>
Date: 2018-02-19 08:15:16
Also in:
linux-arm-kernel, linux-rockchip
Subsystem:
the rest · Maintainer:
Linus Torvalds
The sdio signals are routed through the connector to the baseboard, where the wifi module is also located. So move the sdio node to the excavator as well. Signed-off-by: Heiko Stuebner <redacted> --- Hi Vicente, after looking at the issue, I guess something like this and the following patch should help your situation? I've heared about the sapphire being used standalone some times and thus think it can be justified to add that standalone version. Heiko .../boot/dts/rockchip/rk3399-sapphire-excavator.dts | 16 ++++++++++++++++ arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi | 16 ---------------- 2 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
index b7bd88fb3ae3..68416fae4fea 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire-excavator.dts@@ -232,6 +232,22 @@ }; }; +&sdio0 { + bus-width = <4>; + cap-sd-highspeed; + cap-sdio-irq; + clock-frequency = <50000000>; + disable-wp; + keep-power-in-suspend; + max-frequency = <50000000>; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; +}; + &spdif { i2c-scl-rising-time-ns = <450>; i2c-scl-falling-time-ns = <15>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
index 46c95ccfd5cb..31568b4e8aa1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3399-sapphire.dtsi@@ -520,22 +520,6 @@ status = "okay"; }; -&sdio0 { - bus-width = <4>; - cap-sd-highspeed; - cap-sdio-irq; - clock-frequency = <50000000>; - disable-wp; - keep-power-in-suspend; - max-frequency = <50000000>; - mmc-pwrseq = <&sdio_pwrseq>; - non-removable; - pinctrl-names = "default"; - pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; - sd-uhs-sdr104; - status = "okay"; -}; - &sdmmc { bus-width = <4>; cap-mmc-highspeed;
--
2.15.1