[PATCH v2 08/10] arm64: dts: renesas: r8a77995: Set EtherAVB phy mode to "rgmii"
From: Jacopo Mondi <jacopo+renesas@jmondi.org>
Date: 2018-02-27 10:23:55
Also in:
linux-arm-kernel, linux-renesas-soc, lkml, netdev
Subsystem:
arm/risc-v/renesas architecture, the rest · Maintainers:
Geert Uytterhoeven, Magnus Damm, Linus Torvalds
Set the "phy-mode" property of EtherAVB device to "rgmii" and let board files override it if the installed PHY layer provides delays for the RX/TX channels. Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> --- arch/arm64/boot/dts/renesas/r8a77995.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/renesas/r8a77995.dtsi b/arch/arm64/boot/dts/renesas/r8a77995.dtsi
index cd3c6a3..fc48677 100644
--- a/arch/arm64/boot/dts/renesas/r8a77995.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77995.dtsi@@ -512,7 +512,7 @@ clocks = <&cpg CPG_MOD 812>; power-domains = <&sysc R8A77995_PD_ALWAYS_ON>; resets = <&cpg 812>; - phy-mode = "rgmii-txid"; + phy-mode = "rgmii"; iommus = <&ipmmu_ds0 16>; #address-cells = <1>; #size-cells = <0>;
--
2.7.4