于 2018年2月25日 GMT+08:00 下午4:11:34, Julian Calaby [off-list ref] 写到:

Hi Jernej,

On Sun, Feb 25, 2018 at 8:45 AM, Jernej Skrabec
[off-list ref] wrote:

quoted

Enable HDMI output on all boards which have HDMI connector.

Signed-off-by: Jernej Skrabec <redacted>
---
 arch/arm/boot/dts/sun8i-h3-bananapi-m2-plus.dts    | 25

++++++++++++++++++++++

quoted

 arch/arm/boot/dts/sun8i-h3-beelink-x2.dts          | 25

++++++++++++++++++++++

quoted

 arch/arm/boot/dts/sun8i-h3-libretech-all-h3-cc.dts | 25

++++++++++++++++++++++

quoted

 arch/arm/boot/dts/sun8i-h3-nanopi-m1.dts           | 25

++++++++++++++++++++++

quoted

 arch/arm/boot/dts/sun8i-h3-orangepi-2.dts          | 25

++++++++++++++++++++++

quoted

 arch/arm/boot/dts/sun8i-h3-orangepi-lite.dts       | 25

++++++++++++++++++++++

quoted

 arch/arm/boot/dts/sun8i-h3-orangepi-one.dts        | 24

+++++++++++++++++++++

quoted

 arch/arm/boot/dts/sun8i-h3-orangepi-pc.dts         | 25

++++++++++++++++++++++

quoted

 8 files changed, 199 insertions(+)

As I understand it, the H2+ is just a slightly trimmed down H3. In
terms of HDMI support, the difference is that the H2+ can't output 4k.

H2+ can OUTPUT 4K. The BSP restricts it to DECODE 4K. (And mainline won't have such restriction)

If this code is compatible with the H2+, could you please add the
necessary bits and pieces to the h2-plus DTSs too?

Thanks,

-- 
You received this message because you are subscribed to the Google Groups "linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
For more options, visit https://groups.google.com/d/optout.