Thread (67 messages) flat view 67 messages, 7 authors, 2018-04-16

Re: [PATCH v2 19/19] ARM64: dts: r8a77965: Add EtherAVB device node

From: Geert Uytterhoeven <geert@linux-m68k.org>
Date: 2018-02-23 07:06:15
Also in: linux-arm-kernel, linux-renesas-soc, lkml

Hi Simon,

On Thu, Feb 22, 2018 at 4:54 PM, Simon Horman [off-list ref] wrote:
On Wed, Feb 21, 2018 at 09:53:58PM +0300, Sergei Shtylyov wrote:
quoted
On 02/21/2018 09:23 PM, Simon Horman wrote:
quoted
...
quoted
quoted
quoted
quoted
quoted
quoted
quoted
+                    clocks = <&cpg CPG_MOD 812>;
+                    power-domains = <&sysc 32>;
+                    resets = <&cpg 812>;
+                    phy-mode = "rgmii-txid";
   Why not just "rgmii"? TX delay is a board specific detail, no?
I admit I took this one straight from r8a7796 dtsi.
Would you like to me resend and change this?
   Yes, unless Simon would fix it while merging...
Can I confirm the desired change is s/rgmii-txid/rgmii/ ?
   Yes.
   Apparently that means that this prop should be overridden in the board file
(which may not be an easy task given the board is Salvator-XS again).

[...]
Can we override it in r8a77965-salvator-x.dts or r8a77965-salvator-xs.dts?
   In salvator-common.dtsi most probably -- it has the PHY data for Ether AVB.
quoted
I feel that I'm missing an important point here.
   Well, r8a779{5|6}.dtsi also have phy-mode = "rgmii-txid" (which was
   unjustified in my current understanding). Thus such board override
   wouldn't hurt them. But we lack a patch modifying salvator-common.dtsi
   in htis series, so I'm now thinking a respin of this series is needed
   anyway... sorry for being unclear. :-)
While I've applied other patches in this series I have
not applied this one - mainly to allow this discussion to conclude.

Is an appropriate solution to do the following?

1) Atomically update
   a) r8a779{5|6}.dtsi to use "rgmii" and
   b) salvator-common.dtsi to use "rgmii-txid"
2) Update this patch to use "rgmii"
No need for atomics.
It can all be done by patches touching single files only:
  1) Add "rgmii-txid" to board .dts(i) files,
  2) Change s/rgmii-txid/rgmii/ in SoC .dtsi files.

Gr{oetje,eeting}s,

                        Geert

--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org

In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
                                -- Linus Torvalds
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help