[PATCH 1/2] dt-bindings: pinctrl: artpec6: add missing pin group uart5nocts
From: Niklas Cassel <hidden>
Date: 2018-02-22 15:23:40
Also in:
lkml
Subsystem:
arm/artpec machine support, open firmware and flattened device tree bindings, pin control subsystem, the rest · Maintainers:
Jesper Nilsson, Lars Persson, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Walleij, Linus Torvalds
Add missing pin group uart5nocts (all pins except cts), which has been
supported by the artpec6 pinctrl driver since its initial submission.
Fixes: 00df0582eab1 ("pinctrl: Add pincontrol driver for ARTPEC-6 SoC")
Signed-off-by: Niklas Cassel <redacted>
---
Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
index 47284f85ec80..c3f9826692bc 100644
--- a/Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt@@ -20,7 +20,8 @@ Required subnode-properties: gpio: cpuclkoutgrp0, udlclkoutgrp0, i2c1grp0, i2c2grp0, i2c3grp0, i2s0grp0, i2s1grp0, i2srefclkgrp0, spi0grp0, spi1grp0, pciedebuggrp0, uart0grp0, uart0grp1, uart1grp0, - uart2grp0, uart2grp1, uart3grp0, uart4grp0, uart5grp0 + uart2grp0, uart2grp1, uart3grp0, uart4grp0, uart5grp0, + uart5nocts cpuclkout: cpuclkoutgrp0 udlclkout: udlclkoutgrp0 i2c1: i2c1grp0
@@ -37,7 +38,7 @@ Required subnode-properties: uart2: uart2grp0, uart2grp1 uart3: uart3grp0 uart4: uart4grp0 - uart5: uart5grp0 + uart5: uart5grp0, uart5nocts nand: nandgrp0 sdio0: sdio0grp0 sdio1: sdio1grp0
--
2.14.2