Thread (16 messages) 16 messages, 5 authors, 2018-02-22
STALE3032d

[PATCH v2 7/7] watchdog: coh901327: make use of timeout-secs provided in devicetree

From: Marcus Folkesson <marcus.folkesson@gmail.com>
Date: 2018-02-10 09:19:49
Also in: linux-amlogic, linux-arm-kernel, linux-mediatek, linux-watchdog, lkml
Subsystem: the rest, watchdog device drivers · Maintainers: Linus Torvalds, Wim Van Sebroeck, Guenter Roeck

watchdog_init_timeout() will allways pick timeout_param since it
defaults to a valid timeout.

Following best practice described in
Documentation/watchdog/watchdog-kernel-api.txt to make use of
the parameter logic.

Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
---

v2:
	- Set .timeout in coh901327_wdt structure declaration.
	- Set .min_timeout to 1 instead of 0. I could not find a datasheet
	  for coh901327, so I'm not sure if 0 is valid. However, 0 seems
		  wrong to me and most driver has 1 as min value. If it should
		  be 0, please let me know and I have to set another initial
		  value for margin.

 drivers/watchdog/coh901327_wdt.c | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)
diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
index 4410337f4f7f..5d8eb9a30879 100644
--- a/drivers/watchdog/coh901327_wdt.c
+++ b/drivers/watchdog/coh901327_wdt.c
@@ -67,7 +67,9 @@
 #define U300_WDOG_IFR_WILL_BARK_IRQ_FORCE_ENABLE			0x0001U
 
 /* Default timeout in seconds = 1 minute */
-static unsigned int margin = 60;
+#define U300_WDOG_DEFAULT_TIMEOUT					60
+
+static unsigned int margin;
 static int irq;
 static void __iomem *virtbase;
 static struct device *parent;
@@ -235,8 +237,9 @@ static struct watchdog_device coh901327_wdt = {
 	 * timeout register is max
 	 * 0x7FFF = 327670ms ~= 327s.
 	 */
-	.min_timeout = 0,
+	.min_timeout = 1,
 	.max_timeout = 327,
+	.timeout = U300_WDOG_DEFAULT_TIMEOUT,
 };
 
 static int __exit coh901327_remove(struct platform_device *pdev)
@@ -315,9 +318,7 @@ static int __init coh901327_probe(struct platform_device *pdev)
 		goto out_no_irq;
 	}
 
-	ret = watchdog_init_timeout(&coh901327_wdt, margin, dev);
-	if (ret < 0)
-		coh901327_wdt.timeout = 60;
+	watchdog_init_timeout(&coh901327_wdt, margin, dev);
 
 	coh901327_wdt.parent = dev;
 	ret = watchdog_register_device(&coh901327_wdt);
-- 
2.15.1
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help