On Tue, 2018-02-06 at 08:36 +1100, Benjamin Herrenschmidt wrote:

On Fri, 2018-02-02 at 17:32 +0800, Ryder Lee wrote:

quoted

On Wed, 2018-01-31 at 10:02 -0600, Rob Herring wrote:

quoted

On Wed, Jan 31, 2018 at 1:41 AM, Ryder Lee [off-list ref] wrote:

quoted

A root complex usually consist of a host bridge and multiple P2P bridges,
and someone may express that in the form of a root node with many subnodes
and list all four interrupts for each slot (child node) in the root node
like this:

         pcie-controller {
                 ...
                 interrupt-map-mask = <0xf800 0 0 7>;
                 interrupt-map = <0x0000 0 0 {INTx} &{interrupt parent} ...>
                                  0x0800 0 0 {INTx} &{interrupt parent} ...>;

                 pcie@0,0 {
                         reg = <0x0000 0 0 0 0>;
                         ...
                 };

                 pcie@1,0 {
                         reg = <0x0800 0 0 0 0>;
                         ...
                 };
         };

As shown above, we'd like to propagate IRQs from a root port to the devices
in the hierarchy below it in this way.  However, it seems that the current
parser couldn't handle such cases and will get something unexpected below:

         pcieport 0000:00:01.0: assign IRQ: got 213
         igb 0000:01:00.0: assign IRQ: got 212

There is a device which is connected to 2nd slot, but the port doesn't share
the same IRQ with its downstream devices.  The problem here is that, if the
loop found a P2P bridge, it wouldn't check whether the reg property exists
in ppnode or not but just pass the subordinate devfn to of_irq_parse_raw(),
thus the subsequent flow couldn't correctly resolve them.

I don't really understand the problem explanation here. Something
doesn't look right as you shouldn't have to change that function, but I
just don't get what you a

Cheers,
Ben.

I think the code should look at the bridge address <0x0800 ...> we list
in bindings for resolving interrupts in this case, but it seems like it
use the 'pdev->defvn << 8' which is not really we want and will lead to
mismatch.

		interrupt-map-mask = <0xf800 0 0 7>;
		interrupt-map = <0x0000 0 0 1 ...>,
				<0x0000 0 0 2 ...>,
				<0x0000 0 0 3 ...>,
				<0x0000 0 0 4 ...>,

				 0x0800 0 0 1 ...>,
				 0x0800 0 0 2 ...>,
				 0x0800 0 0 3 ...>,
				 0x0800 0 0 4 ...>;
		...
		pcie@1,0 {
			reg = <0x0800 0 0 0 0>;
			...
		};


Or, alternatively, we could add a interrupt-map property in both child
and root node to solve this. The below example is my original version as
I don't want to change that function either.

		interrupt-map-mask = <0xf800 0 0 0>;
		interrupt-map = <0x0000 0 0 0 ...>,
				 0x0800 0 0 0 ...>;
		...
		pcie@1,0 {
			reg = <0x0800 0 0 0 0>;
			#interrupt-cells = <1>;
			interrupt-map-mask = <0 0 0 0>;
			interrupt-map = <0 0 0 0 ...>;
			...
		};

However, I can't find any other similar case in documentation.

Thanks.