[PATCHv3] tlv320dac33: Add device tree bindings
From: Pavel Machek <hidden>
Date: 2018-02-05 08:25:09
Also in:
alsa-devel, linux-arm-kernel, linux-omap, lkml
Subsystem:
open firmware and flattened device tree bindings, sound - soc layer / dynamic audio power management (asoc), the rest · Maintainers:
Rob Herring, Krzysztof Kozlowski, Conor Dooley, Liam Girdwood, Mark Brown, Linus Torvalds
This adds device tree bindings for tlv320dac33.c. Acked-by: Peter Ujfalusi <redacted> Signed-off-by: Pavel Machek <redacted>
diff --git a/Documentation/devicetree/bindings/sound/tlv320dac33.txt b/Documentation/devicetree/bindings/sound/tlv320dac33.txt
new file mode 100644
index 0000000..aee0a87
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tlv320dac33.txt@@ -0,0 +1,32 @@ +Texas Instruments - tlv320dac33 Codec module + +The tlv320dac33 serial control bus communicates through I2C protocols. + +Required properties: + +- compatible - "ti,tlv320dac33" +- reg - I2C slave address +- ti,burst-bclkdiv - BCLK divider value in burst mode. Valid range is 1..255. + +Optional properties: + +- reset-gpios - gpio pin to power the device, active high. + +- interrupts - The interrupt output from the device. +- interrupt-parent - The parent interrupt controller. + +- ti,keep-bclk - Keep the BCLK running in FIFO modes. + +Example: + +tlv320dac33: audio-codec@19 { + compatible = "ti,tlv320dac33"; + reg = <0x19>; + + interrupt-parent = <&gpio2>; + interrupts = <21 1>; /* gpio_53, IRQF_TRIGGER_RISING */ + reset-gpios = <&gpio2 28 0>; /* gpio_60 */ + + ti,keep-bclk; + ti,burst-bclkdiv = <3>; +};
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html