[PATCH 3/4] dt-bindings: add binding for i.MX8MQ CCM
From: Lucas Stach <l.stach@pengutronix.de>
Date: 2018-01-17 18:29:49
Also in:
linux-arm-kernel, linux-clk
Subsystem:
common clk framework, nxp i.mx clock drivers, open firmware and flattened device tree bindings, the rest · Maintainers:
Michael Turquette, Stephen Boyd, Abel Vesa, Rob Herring, Krzysztof Kozlowski, Conor Dooley, Linus Torvalds
This adds the binding for the i.MX8MQ Clock Controller Module. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> --- .../devicetree/bindings/clock/imx8mq-clock.txt | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/imx8mq-clock.txt
diff --git a/Documentation/devicetree/bindings/clock/imx8mq-clock.txt b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt
new file mode 100644
index 000000000000..c9b0123b80d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8mq-clock.txt@@ -0,0 +1,20 @@ +* Clock bindings for NXP i.MX8M Quad + +Required properties: +- compatible: Should be "nxp,imx8mq-ccm" +- reg: Address and length of the register set +- #clock-cells: Should be <1> +- clocks: list of clock specifiers, must contain an entry for each required + entry in clock-names +- clock-names: should include the following entries: + - "ckil" + - "osc_25m" + - "osc_27m" + - "clk_ext1" + - "clk_ext2" + - "clk_ext3" + - "clk_ext4" + +The clock consumer should specify the desired clock by having the clock +ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx8mq-clock.h +for the full list of i.MX8M Quad clock IDs.
--
2.11.0