Re: [PATCH v3 0/7] Marvell NAND controller rework with ->exec_op()

Hello Willy,

On Thu, 11 Jan 2018 23:28:33 +0100
Willy Tarreau [off-list ref] wrote:

Hi Miquel,

On Tue, Jan 09, 2018 at 11:36:30AM +0100, Miquel Raynal wrote:

quoted

These changes have been tested on:
   - PXA3xx platform with a CM-X300 board (2kiB page NAND, 1b/512B
     strength, Hamming ECC engine) [32 bits]
   - Armada 385 DB AP (4kiB page NAND, 4b/512B, BCH ECC engine) [32
bits]
   - Armada 398 DB (4kiB page NAND, 8b/512B, BCH ECC engine using a
layout with a last chunk different than the others) [32 bits]
   - Armada 7040 DB and Armada 8040 DB (4kiB page NAND, 4b/512B,
BCH ECC engine) [64 bits]
   - Triax dvb-tc board (2kiB page NAND, 4b/512B, BCH ECC engine)
[32 bits]  

If you're interested, I have a mirabox with an armada 370 which uses
the same driver. I've not powered it up for a while but if that can
be useful I can try to find some time for this.

Thank you very much for the proposal!

For the moment I don't think there is a need as this type of platform
has already been tested, but I keep it in mind.

Thanks again!
Miquèl
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html