This series of patches adds loadable kernel module and power management
support to Tegra PCIe host controller driver. irq_set_msi_desc() and
tegra_cpuidle_pcie_irqs_in_use() symbols will be taken care in next
set of patches.

These patches are tested on Jetson TK1, TX1 and TX2 platforms, following
are the verification details.
	- Multiple module insert & remove
	- PCIe device functionality after module insert
	- Free clock, resets, regulators, powergate, iomem and interrupt
	resources after module remove
	- PCIe device functionality after resume from RAM

V2: PM QoS fix is dropped in V2 from this series because the fix is
incorporated in latest 'commit 0759e80b84e3 ("PM / QoS: Fix device resume
latency framework")'. Update commit message of few patches in V2.

V3: Patches to export irq_set_msi_desc() and tegra_cpuidle_pcie_irqs_in_use()
are dropped based on review comments. These symbols will be addressed in next
series. Took care of few other review comments.

V4: Dropped pci_find_host_bridge() export patch and added new patch to use
bus->sysdata for private data.

V5: Decouple from https://patchwork.ozlabs.org/patch/832053/ and rebase
on top of linux-next

V6: Rebased on lpieralisi/pci/tegra branch

Manikanta Maddireddy (7):
  of: Export of_pci_range_to_resource()
  PCI: tegra: Use bus->sysdata to store and get host private data
  PCI: tegra: Remove PCI_REASSIGN_ALL_BUS flag for Tegra PCIe
  PCI: tegra: Free resources on probe failure
  PCI: tegra: Add loadable kernel module support
  PCI: tegra: Broadcast PME_Turn_Off message before link goes to L2
  PCI: tegra: Add power management support

 drivers/of/address.c         |   1 +
 drivers/pci/host/Kconfig     |   2 +-
 drivers/pci/host/pci-tegra.c | 333 ++++++++++++++++++++++++++++++++-----------
 3 files changed, 253 insertions(+), 83 deletions(-)

-- 
2.1.4