[PATCH 7/8] ARM: dts: keystone-k2g: Move keystone_dsp_gpio to under device-state-control

The keystone_dsp_gpio node describes a device that is a component of the
device state control module. As such, it should not be a member of soc0
bus but instead a sub-node of device-state-control.

This move also fixes a warning about not having a reg property. Now
that this is a sub-node of device-state-control, a syscon type node,
we add this reg property but relative to the syscon base, this way
when the dt-binding/driver are updated we can drop the non-standard
gpio,syscon-dev property completely and simply use get_resource() in
the driver.

Signed-off-by: Andrew F. Davis <redacted>
Acked-by: Nishanth Menon <redacted>
---
 arch/arm/boot/dts/keystone-k2g.dtsi | 15 ++++++++-------
 1 file changed, 8 insertions(+), 7 deletions(-)

diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 19f938e3c27e..71a8588f42e4 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi

@@ -110,6 +110,14 @@
 				#interrupt-cells = <1>;
 				ti,syscon-dev = <&devctrl 0x2a0>;
 			};
+
+			dspgpio0: keystone_dsp_gpio@240 {
+				compatible = "ti,keystone-dsp-gpio";
+				reg = <0x240 0x4>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio,syscon-dev = <&devctrl 0x240>;
+			};
 		};
 
 		uart0: serial@2530c00 {

@@ -199,13 +207,6 @@
 			status = "disabled";
 		};
 
-		dspgpio0: keystone_dsp_gpio@2620240 {
-			compatible = "ti,keystone-dsp-gpio";
-			gpio-controller;
-			#gpio-cells = <2>;
-			gpio,syscon-dev = <&devctrl 0x240>;
-		};
-
 		dsp0: dsp@10800000 {
 			compatible = "ti,k2g-dsp";
 			reg = <0x10800000 0x00100000>,

-- 
2.15.1

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html