On Wed, Dec 27, 2017 at 03:37:51PM +0100, Aleksandar Markovic wrote:

quoted

From: Paul Burton <redacted>

Document a binding for the MIPS Cluster Power Controller (CPC) that
allows the device tree to specify where the CPC registers are located.

Signed-off-by: Paul Burton <redacted>
Signed-off-by: Aleksandar Markovic <redacted>
---
 Documentation/devicetree/bindings/power/mti,mips-cpc.txt | 8 ++++++++
 1 file changed, 8 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/power/mti,mips-cpc.txt

diff --git a/Documentation/devicetree/bindings/power/mti,mips-cpc.txt b/Documentation/devicetree/bindings/power/mti,mips-cpc.txt
new file mode 100644

Is it worth adding to the MIPS GENERIC PLATFORM entry of MAINTAINERS,
given that it directly benefits it?

Cheers
James

If nobody objects, in the v4 of this series, as a part of this particular patch, I am going to add the line:

F:       Documentation/devicetree/bindings/power/mti,mips-cpc.txt

to the following segment in MAINTAINERS file:

MIPS GENERIC PLATFORM
M:      Paul Burton [off-list ref]
L:      linux-mips-6z/3iImG2C8G8FEW9MqTrA@public.gmane.org
S:      Supported
F:      arch/mips/generic/
F:      arch/mips/tools/generic-board-config.sh

v4 is planned to be sent by the end of the day.

Thanks,
Aleksandar--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html