[PATCH 1/3] devicetree: bindings: scsi: hisi_sas: add LED feature for v2 hw
From: John Garry <hidden>
Date: 2018-01-17 15:54:41
Also in:
linux-scsi, lkml
Subsystem:
hisilicon sas controller, open firmware and flattened device tree bindings, scsi subsystem, the rest · Maintainers:
Yihang Li, Rob Herring, Krzysztof Kozlowski, Conor Dooley, "James E.J. Bottomley", "Martin K. Petersen", Linus Torvalds
From: Xiaofei Tan <redacted> Add directly attached disk LED feature for v2 hw. Signed-off-by: Xiaofei Tan <redacted> Signed-off-by: John Garry <redacted> --- Documentation/devicetree/bindings/scsi/hisilicon-sas.txt | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
index b6a869f..df3bef7 100644
--- a/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt
+++ b/Documentation/devicetree/bindings/scsi/hisilicon-sas.txt@@ -8,7 +8,10 @@ Main node required properties: (b) "hisilicon,hip06-sas-v2" for v2 hw in hip06 chipset (c) "hisilicon,hip07-sas-v2" for v2 hw in hip07 chipset - sas-addr : array of 8 bytes for host SAS address - - reg : Address and length of the SAS register + - reg : Contains two regions. The first is the address and length of the SAS + register. The second is the address and length of CPLD register for + SGPIO control. The second is optional, and should be set only when + we use a CPLD for directly attached disk LED control. - hisilicon,sas-syscon: phandle of syscon used for sas control - ctrl-reset-reg : offset to controller reset register in ctrl reg - ctrl-reset-sts-reg : offset to controller reset status register in ctrl reg
--
1.9.1