[PATCH v2 02/15] mmc: mmci: Don't pretend all variants to have MCI_STARBITERR flag
From: <hidden>
Date: 2018-01-16 12:32:15
Also in:
linux-clk, linux-gpio, linux-mmc, lkml
Subsystem:
arm primecell mmci pl180/1 driver, multimedia card (mmc), secure digital (sd) and sdio subsystem, the rest · Maintainers:
Russell King, Ulf Hansson, Linus Torvalds
From: Patrice Chotard <redacted> This patch prepares for supporting the STM32 variant that has no such bit in the status register. Signed-off-by: Andrea Merello <redacted> Signed-off-by: Patrice Chotard <redacted> --- v2: _ replace start_err bool type by u32 drivers/mmc/host/mmci.c | 16 ++++++++++++++-- 1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index 3125dc0..8a4fbc2 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c@@ -83,6 +83,8 @@ * @qcom_dml: enables qcom specific dma glue for dma transfers. * @reversed_irq_handling: handle data irq before cmd irq. * @mmcimask1: true if variant have a MMCIMASK1 register. + * @start_err: bitmask identifying the STARTBITERR bit inside MMCISTATUS + * register. */ struct variant_data { unsigned int clkreg;
@@ -113,6 +115,7 @@ struct variant_data { bool qcom_dml; bool reversed_irq_handling; bool mmcimask1; + u32 start_err; }; static struct variant_data variant_arm = {
@@ -123,6 +126,7 @@ struct variant_data { .f_max = 100000000, .reversed_irq_handling = true, .mmcimask1 = true, + .start_err = MCI_STARTBITERR, }; static struct variant_data variant_arm_extended_fifo = {
@@ -132,6 +136,7 @@ struct variant_data { .pwrreg_powerup = MCI_PWR_UP, .f_max = 100000000, .mmcimask1 = true, + .start_err = MCI_STARTBITERR, }; static struct variant_data variant_arm_extended_fifo_hwfc = {
@@ -142,6 +147,7 @@ struct variant_data { .pwrreg_powerup = MCI_PWR_UP, .f_max = 100000000, .mmcimask1 = true, + .start_err = MCI_STARTBITERR, }; static struct variant_data variant_u300 = {
@@ -158,6 +164,7 @@ struct variant_data { .pwrreg_clkgate = true, .pwrreg_nopower = true, .mmcimask1 = true, + .start_err = MCI_STARTBITERR, }; static struct variant_data variant_nomadik = {
@@ -175,6 +182,7 @@ struct variant_data { .pwrreg_clkgate = true, .pwrreg_nopower = true, .mmcimask1 = true, + .start_err = MCI_STARTBITERR, }; static struct variant_data variant_ux500 = {
@@ -198,6 +206,7 @@ struct variant_data { .busy_detect_mask = MCI_ST_BUSYENDMASK, .pwrreg_nopower = true, .mmcimask1 = true, + .start_err = MCI_STARTBITERR, }; static struct variant_data variant_ux500v2 = {
@@ -223,6 +232,7 @@ struct variant_data { .busy_detect_mask = MCI_ST_BUSYENDMASK, .pwrreg_nopower = true, .mmcimask1 = true, + .start_err = MCI_STARTBITERR, }; static struct variant_data variant_qcom = {
@@ -242,6 +252,7 @@ struct variant_data { .qcom_fifo = true, .qcom_dml = true, .mmcimask1 = true, + .start_err = MCI_STARTBITERR, }; /* Busy detection for the ST Micro variant */
@@ -935,8 +946,9 @@ static void mmci_start_data(struct mmci_host *host, struct mmc_data *data) return; /* First check for errors */ - if (status & (MCI_DATACRCFAIL|MCI_DATATIMEOUT|MCI_STARTBITERR| - MCI_TXUNDERRUN|MCI_RXOVERRUN)) { + if (status & (MCI_DATACRCFAIL | MCI_DATATIMEOUT | + host->variant->start_err | + MCI_TXUNDERRUN | MCI_RXOVERRUN)) { u32 remain, success; /* Terminate the DMA transfer */
--
1.9.1