[PATCH 09/25] arm: nspire: dts: Remove leading 0x and 0s from bindings notation
From: Mathieu Malaterre <hidden>
Date: 2017-12-15 11:15:59
Subsystem:
the rest · Maintainer:
Linus Torvalds
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <redacted>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <redacted>
---
arch/arm/boot/dts/nspire-classic.dtsi | 2 +-
arch/arm/boot/dts/nspire-cx.dts | 2 +-
arch/arm/boot/dts/nspire.dtsi | 28 ++++++++++++++--------------
3 files changed, 16 insertions(+), 16 deletions(-)
diff --git a/arch/arm/boot/dts/nspire-classic.dtsi b/arch/arm/boot/dts/nspire-classic.dtsi
index 4907c5085d4b..84db1986001c 100644
--- a/arch/arm/boot/dts/nspire-classic.dtsi
+++ b/arch/arm/boot/dts/nspire-classic.dtsi@@ -66,7 +66,7 @@ #address-cells = <1>; #size-cells = <1>; - intc: interrupt-controller@DC000000 { + intc: interrupt-controller@dc000000 { compatible = "lsi,zevio-intc"; interrupt-controller; reg = <0xDC000000 0x1000>;
diff --git a/arch/arm/boot/dts/nspire-cx.dts b/arch/arm/boot/dts/nspire-cx.dts
index 08e0b81b3385..bf58fe095f19 100644
--- a/arch/arm/boot/dts/nspire-cx.dts
+++ b/arch/arm/boot/dts/nspire-cx.dts@@ -92,7 +92,7 @@ #address-cells = <1>; #size-cells = <1>; - intc: interrupt-controller@DC000000 { + intc: interrupt-controller@dc000000 { compatible = "arm,pl190-vic"; interrupt-controller; reg = <0xDC000000 0x1000>;
diff --git a/arch/arm/boot/dts/nspire.dtsi b/arch/arm/boot/dts/nspire.dtsi
index 1a5ae4cd107f..88b9126fad9f 100644
--- a/arch/arm/boot/dts/nspire.dtsi
+++ b/arch/arm/boot/dts/nspire.dtsi@@ -24,7 +24,7 @@ reg = <0x00000000 0x80000>; }; - sram: sram@A4000000 { + sram: sram@a4000000 { device = "memory"; reg = <0xA4000000 0x20000>; };
@@ -75,11 +75,11 @@ #size-cells = <1>; ranges; - spi: spi@A9000000 { + spi: spi@a9000000 { reg = <0xA9000000 0x1000>; }; - usb0: usb@B0000000 { + usb0: usb@b0000000 { compatible = "lsi,zevio-usb"; reg = <0xB0000000 0x1000>; interrupts = <8>;
@@ -88,13 +88,13 @@ vbus-supply = <&vbus_reg>; }; - usb1: usb@B4000000 { + usb1: usb@b4000000 { reg = <0xB4000000 0x1000>; interrupts = <9>; status = "disabled"; }; - lcd: lcd@C0000000 { + lcd: lcd@c0000000 { compatible = "arm,pl111", "arm,primecell"; reg = <0xC0000000 0x1000>; interrupts = <21>;
@@ -103,16 +103,16 @@ clock-names = "apb_pclk"; }; - adc: adc@C4000000 { + adc: adc@c4000000 { reg = <0xC4000000 0x1000>; interrupts = <11>; }; - tdes: crypto@C8010000 { + tdes: crypto@c8010000 { reg = <0xC8010000 0x1000>; }; - sha256: crypto@CC000000 { + sha256: crypto@cc000000 { reg = <0xCC000000 0x1000>; };
@@ -141,13 +141,13 @@ interrupts = <1>; }; - timer0: timer@900C0000 { + timer0: timer@900c0000 { reg = <0x900C0000 0x1000>; clocks = <&timer_clk>; }; - timer1: timer@900D0000 { + timer1: timer@900d0000 { reg = <0x900D0000 0x1000>; interrupts = <19>;
@@ -165,16 +165,16 @@ interrupts = <4>; }; - misc: misc@900A0000 { + misc: misc@900a0000 { reg = <0x900A0000 0x1000>; }; - pwr: pwr@900B0000 { + pwr: pwr@900b0000 { reg = <0x900B0000 0x1000>; interrupts = <15>; }; - keypad: input@900E0000 { + keypad: input@900e0000 { compatible = "ti,nspire-keypad"; reg = <0x900E0000 0x1000>; interrupts = <16>;
@@ -185,7 +185,7 @@ clocks = <&apb_pclk>; }; - contrast: contrast@900F0000 { + contrast: contrast@900f0000 { reg = <0x900F0000 0x1000>; };
--
2.11.0