Thread (1 message) 1 message, 1 author, 2017-12-23

Re: [PATCHv4 2/3] net: socionext: Add Synquacer NetSec driver

From: Ard Biesheuvel <hidden>
Date: 2017-12-23 10:39:19
Also in: netdev

On 23 December 2017 at 05:45,  [off-list ref] wrote:
From: Jassi Brar <redacted>

This driver adds support for Socionext "netsec" IP Gigabit
Ethernet + PHY IP used in the Synquacer SC2A11 SoC.

Signed-off-by: Ard Biesheuvel <redacted>
Signed-off-by: Jassi Brar <redacted>
---
 drivers/net/ethernet/Kconfig            |    1 +
 drivers/net/ethernet/Makefile           |    1 +
 drivers/net/ethernet/socionext/Kconfig  |   29 +
 drivers/net/ethernet/socionext/Makefile |    1 +
 drivers/net/ethernet/socionext/netsec.c | 1844 +++++++++++++++++++++++++++++++
 5 files changed, 1876 insertions(+)
 create mode 100644 drivers/net/ethernet/socionext/Kconfig
 create mode 100644 drivers/net/ethernet/socionext/Makefile
 create mode 100644 drivers/net/ethernet/socionext/netsec.c
...
quoted hunk
diff --git a/drivers/net/ethernet/socionext/netsec.c b/drivers/net/ethernet/socionext/netsec.c
new file mode 100644
index 0000000..6af047b
--- /dev/null
+++ b/drivers/net/ethernet/socionext/netsec.c
...
+static int netsec_netdev_load_ucode_region(struct netsec_priv *priv, u32 reg,
+                                          u32 addr_h, u32 addr_l, u32 size)
+{
+       u64 base = (u64)addr_h << 32 | addr_l;
+       void __iomem *ucode;
+       u32 i;
+
+       ucode = ioremap(base, size * sizeof(u32));
+       if (!ucode)
+               return -ENOMEM;
+
+       for (i = 0; i < size; i++)
+               netsec_write(priv, reg, readl(ucode + i));
+
This is incorrect. The microcode is written one u32 word at a time,
and indexing ucode like this results in byte indexing, not u32
indexing.

I changed the ucode declaration locally to

u32 __iomem *ucode;

and now everything works fine again.

+       iounmap(ucode);
+       return 0;
+}
+
...
+static int netsec_register_mdio(struct netsec_priv *priv, u32 phy_addr)
+{
+       struct mii_bus *bus;
+       int ret;
+
+       bus = devm_mdiobus_alloc(priv->dev);
+       if (!bus)
+               return -ENOMEM;
+
+       snprintf(bus->id, MII_BUS_ID_SIZE, "%s", dev_name(priv->dev));
+       bus->priv = priv;
+       bus->name = "SNI NETSEC MDIO";
+       bus->read = netsec_phy_read;
+       bus->write = netsec_phy_write;
+       bus->parent = priv->dev;
+       priv->mii_bus = bus;
+
+       if (dev_of_node(priv->dev)) {
+               struct device_node *mdio_node, *parent = dev_of_node(priv->dev);
+
+               mdio_node = of_get_child_by_name(parent, "mdio");
+               if (mdio_node) {
+                       parent = mdio_node;
+               } else {
+                       /* older f/w doesn't populate the mdio subnode,
+                        * allow relaxed upgrade of f/w in due time.
+                        */
+                       dev_err(priv->dev, "Upgrade f/w for mdio subnode!\n");
I wouldn't mind if you dropped this fallback altogether, and would
simply stick with the new binding only. However, if you prefer to keep
it, could you change this to dev_info()? It is not really an error
condition, and dev_err/dev_warns have the annoying tendency to pierce
through 'quiet' boot splashes.
+               }
+
+               ret = of_mdiobus_register(bus, parent);
+               of_node_put(mdio_node);
+
+               if (ret) {
+                       dev_err(priv->dev, "mdiobus register err(%d)\n", ret);
+                       return ret;
+               }
+       } else {
+               /* Mask out all PHYs from auto probing. */
+               bus->phy_mask = ~0;
+               ret = mdiobus_register(bus);
+               if (ret) {
+                       dev_err(priv->dev, "mdiobus register err(%d)\n", ret);
+                       return ret;
+               }
+
+               priv->phydev = get_phy_device(bus, phy_addr, false);
+               if (IS_ERR(priv->phydev)) {
+                       ret = PTR_ERR(priv->phydev);
+                       dev_err(priv->dev, "get_phy_device err(%d)\n", ret);
+                       priv->phydev = NULL;
+                       return -ENODEV;
+               }
+
+               ret = phy_device_register(priv->phydev);
+               if (ret) {
+                       mdiobus_unregister(bus);
+                       dev_err(priv->dev,
+                               "phy_device_register err(%d)\n", ret);
+               }
+       }
+
+       return ret;
+}
+
...

Thanks,
Ard.
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help