Re: [PATCH 1/4] arm64: dts: renesas: r8a7795: add usb3_phy node
From: Simon Horman <hidden>
Date: 2017-12-20 11:42:53
Also in:
linux-renesas-soc
Subsystem:
arm/risc-v/renesas architecture, the rest · Maintainers:
Geert Uytterhoeven, Magnus Damm, Linus Torvalds
Possibly related (same subject, not in this thread)
- 2017-12-07 · [PATCH 1/4] arm64: dts: renesas: r8a7795: add usb3_phy node · Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
On Thu, Dec 07, 2017 at 06:55:39PM +0900, Yoshihiro Shimoda wrote:
quoted hunk
This patch adds USB3.0 PHY node for r8a7795. Signed-off-by: Yoshihiro Shimoda <redacted> --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi index 6db4f10..9710814 100644 --- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi@@ -184,6 +184,19 @@ clock-frequency = <0>; }; + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + soc: soc { compatible = "simple-bus"; interrupt-parent = <&gic>;@@ -1643,6 +1656,19 @@ iommus = <&ipmmu_hc 2>; }; + usb3_phy0: usb-phy@e65ee000 { + compatible = "renesas,r8a7795-usb3-phy", + "renesas,rcar-gen3-usb3-phy"; + reg = <0 0xe65ee000 0 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, + <&usb_extal_clk>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 328>; + #phy-cells = <0>; + status = "disabled"; + }; + xhci0: usb@ee000000 { compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci"; reg = <0 0xee000000 0 0xc00>;
Hi Shimoda-san, I have applied this patch with some minor updates. 1. There was some fuzz when applying the patch which I resolved. 2. I shifted the _clk nodes to the bottom of the file to preserve alphabetical order of the sub-nodes of the root node. This ordering is new and probably was not the case when you submitted the patch (it probably also explains the fuzz). What I have applied is as follows: From: Yoshihiro Shimoda <redacted> Subject: [PATCH] arm64: dts: renesas: r8a7795: add usb3_phy node This patch adds USB3.0 PHY node for r8a7795. Signed-off-by: Yoshihiro Shimoda <redacted> --- arch/arm64/boot/dts/renesas/r8a7795.dtsi | 26 ++++++++++++++++++++++++++ 1 file changed, 26 insertions(+)
diff --git a/arch/arm64/boot/dts/renesas/r8a7795.dtsi b/arch/arm64/boot/dts/renesas/r8a7795.dtsi
index 62dfc7781cc1..d12df6f2ff09 100644
--- a/arch/arm64/boot/dts/renesas/r8a7795.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a7795.dtsi@@ -1631,6 +1631,19 @@ iommus = <&ipmmu_hc 2>; }; + usb3_phy0: usb-phy@e65ee000 { + compatible = "renesas,r8a7795-usb3-phy", + "renesas,rcar-gen3-usb3-phy"; + reg = <0 0xe65ee000 0 0x90>; + clocks = <&cpg CPG_MOD 328>, <&usb3s0_clk>, + <&usb_extal_clk>; + clock-names = "usb3-if", "usb3s_clk", "usb_extal"; + power-domains = <&sysc R8A7795_PD_ALWAYS_ON>; + resets = <&cpg 328>; + #phy-cells = <0>; + status = "disabled"; + }; + xhci0: usb@ee000000 { compatible = "renesas,xhci-r8a7795", "renesas,rcar-gen3-xhci"; reg = <0 0xee000000 0 0xc00>;
@@ -2380,4 +2393,17 @@ }; }; }; + + /* External USB clocks - can be overridden by the board */ + usb3s0_clk: usb3s0 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; + + usb_extal_clk: usb_extal { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <0>; + }; };
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html